Epson CX6400 - Stylus Color Inkjet Información sobre el producto - Página 10
Navegue en línea o descargue pdf Información sobre el producto para Escáner Epson CX6400 - Stylus Color Inkjet. Epson CX6400 - Stylus Color Inkjet 14 páginas. Product support bulletin(s)
También para Epson CX6400 - Stylus Color Inkjet: Especificaciones (2 páginas), Manual de información (4 páginas), Hoja de información del producto (4 páginas), Manual Start Here (8 páginas), Manual Start Here (9 páginas), Manual de instalación (2 páginas), Actualización (1 páginas), Boletín de asistencia sobre productos (6 páginas), Boletín de asistencia sobre productos (1 páginas)
Imprimir página
EPSON Stylus CX6400
Control Panel Error Messages
To diagnose some problems, check the LCD screen on the
CX6400 for these error messages:
Error Message
No XXX ink cartridge – – – >
Press the Color button to
install new ink cartridge.
XXX ink out – – – > Press the
Color button to begin
replacement ink cartridge.
XXX ink cartridge error – – – >
Cartridge replacement is
necessary. Press the Color
button to begin.
Paper jam – – – > Press the
Color button. Remove any
remaining jammed paper by
hand.
Paper out – – – > Load paper
into the sheet feeder, then
press the Color button.
Scanner unit open – – – >
Close the scanner unit
Scanner error – – – > See your
documentation and call
service if necessary.
Printer error – – – > See your
documentation and call
service if necessary.
Multi-page feed error – >
Multiple pages have been fed
into the printer at once.
Remove and reload the paper,
then press the Color button.
The B&W button cannot be
used to print in this mode.
Press the Color button to
print.
The adjust lever is in the ^
position. Except when printing
on envelopes, the m position
is recommended.
Service required.
Cannot be stored saved in the
XXX mode.
EPSON Stylus CX6400
10 -
Solution
The indicated ink cartridge is not
installed. Install the cartridge as
described on page 11.
The indicated ink cartridge is out of ink.
Replace the cartridge as described on
page 11.
There is something wrong with the ink
cartridge. Replace the cartridge as
described on page 11.
Paper is jammed. Press the x
button to clear the jam. If the jam isn't
cleared, remove the paper by hand.
Load paper in the sheet feeder, then
Color
press the x
button to continue
printing.
Carefully close the scanner unit and
press down on it until it clicks securely
into place.
Press the P
On
button to turn off the
CX6400, then turn it back on. If the
error message still appears, contact
your dealer or EPSON, as described in
your Quick Reference or online
Reference Guide.
Open the scanner unit to make sure
any tape securing the ink cartridge
holder has been removed; close the
On
scanner unit. Press the P
button to
turn off the CX6400, then turn it back
on. If the error message still appears,
contact your dealer or EPSON, as
described in your Quick Reference or
online Reference Guide.
The CX6400 has fed more than one
sheet into the paper path. Remove and
reload the paper. Make sure you lower
the feeder guard back over the paper.
Color
Then press the x
button.
Color
You must press the x
button
when you print directly from the
memory card.
Set the paper thickness lever to the
m position. See page 1 to locate the
lever.
Contact your dealer or EPSON, as
described in the Quick Reference or
online Reference Guide.
Save
You can only use the l
button to
save settings in Copy Mode.
Error Message
Cannot recognize the memory
card. Do you want to format
the card?
No memory card. Operation
canceled.
There is not enough free
space on the memory card.
Operation canceled.
The memory card is write-
protect. Operation canceled.
Cannot create a memory card
folder. Operation canceled.
The memory card was
Color
removed. Operation canceled.
The data on the memory card
has changed. Print a new
Index Sheet, then try again.
There is no Index Sheet or it is
not set correctly. Please
perform again after a check.
Check of a picture is not
carried out or marking is not
right. Please perform again
after a check.
Paper is not selected on the
Index Sheet or the oval is not
filled in correctly. Check the
Index Sheet, then try again.
Cleaning the Print Head
If your printouts are unexpectedly light, colors are not correct,
or dots or lines are missing, you may need to clean the print
head. This unclogs the nozzles so they can deliver ink
properly. Print head cleaning uses ink, so clean it only if
quality declines.
Note:
You can also use a printer software utility to clean the print head from
your computer. Select the ? or Help button on your printer settings
window for instructions.
Running a Nozzle Check
1. Make sure your CX6400 is turned on but not printing, and
!
the
error light is off. (If the
you may need to replace an ink cartridge; see page 11.)
2. Press the Setup button to enter Setup Mode.
3. Make sure letter-size paper is loaded.
10/03
Solution
Make sure the CX6400 supports your
memory card; see page 3. If it does,
then format the card or, if you don't
want to format it, insert a new memory
card.
Make sure your card is supported and
inserted in the correct slot; see page 3
for details.
The memory card doesn't have enough
available space to save the image.
Insert a new memory card.
Release the card's write protection, or
insert another memory card.
You cannot create a folder on the
memory card. Insert a new card.
The memory card was ejected during
the operation. Insert a new card.
An image was added or removed from
the memory card after the index form
was printed. Print a new index form.
The index form is not positioned
correctly on the scanner glass. Make
sure the sheet is oriented as shown on
page 5.
The index form was not filled in
correctly. Be sure to fill in the entire
oval under the image(s) you want to
print. See page 8 for guidelines.
Be sure to fill in the entire oval under
the paper you want to use. See page 8
for guidelines.
!
error light is flashing or on,