Epson CX9400Fax - Stylus Color Inkjet Manual rápido - Página 37

Navegue en línea o descargue pdf Manual rápido para Escáner Epson CX9400Fax - Stylus Color Inkjet. Epson CX9400Fax - Stylus Color Inkjet 48 páginas. Supplemental / late breaking information
También para Epson CX9400Fax - Stylus Color Inkjet: Manual (17 páginas), Manual Start Here (24 páginas), Manual Start Here (8 páginas), Especificaciones (2 páginas), Manual Start Here (9 páginas), Actualización (1 páginas), Suplemento (1 páginas)

Imprimir página

Epson CX9400Fax - Stylus Color Inkjet Manual rápido

2. Press

to clear any messages on the display screen.

3. Reload the paper.

Faxing Problems

■

Make sure the recipient's fax machine is turned on and working.

■

Make sure the

telephone wall jack. Verify that the telephone wall jack works by connecting a

phone to it.

■

If the line has static, press

Communication

settings.

■

If the CX9400Fax Series is connected to a DSL phone line, you must have a

DSL filter connected to the phone jack. Contact your DSL provider for the

necessary filter.

Print Quality Problems

■

For the best print quality, use Epson papers (see page 5) and genuine Epson

ink cartridges (see page 33).

■

If you notice light or dark bands across your printouts or they are too faint,

run a nozzle check (see page 30) to see if the print head needs cleaning.

■

If you notice jagged vertical lines, you may need to align the print head. See

the on-screen User's Guide for instructions.

■

The ink cartridges may be low on ink. Check your cartridge status (see

page 30) and replace cartridges, if necessary (see page 33).

■

If you're copying, place the document flat against the scanner glass.

■

Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not

recommended), or use a small amount of glass cleaner on a soft cloth, if

necessary. Do not spray glass cleaner directly on the glass.

port on the CX9400Fax Series is connected to a

LINE

Setup

, and turn off the

, select

Fax Settings

and

V.34

ECM

, select

(Error Correction Mode)

Problems and Solutions