Epson CX9475Fax - Stylus Color Inkjet Manual - Página 16

Navegue en línea o descargue pdf Manual para Escáner Epson CX9475Fax - Stylus Color Inkjet. Epson CX9475Fax - Stylus Color Inkjet 17 páginas. Epson scan icm updater v1.20 (psb.2008.07.001)
También para Epson CX9475Fax - Stylus Color Inkjet: Manual Start Here (24 páginas), Especificaciones (2 páginas), Manual complementario (2 páginas), Actualización (1 páginas)

Imprimir página

Epson CX9475Fax - Stylus Color Inkjet Manual

Epson Stylus CX9400Fax Series

5. If necessary, enter the number of the best pattern and click

Note:

If no patterns are aligned, choose the closest one and click

Realignment. Then print another alignment sheet and check it.

6. When you're done, click

Cleaning the CX9400Fax Series

To keep the CX9400Fax Series working at its best, you should

clean it several times a year.

Caution:

Do not use a hard brush, benzine, alcohol, or paint thinner to clean

the CX9400Fax Series or you may damage it. Do not use oil or

other lubricants inside the CX9400Fax Series or let water get inside

it.

1. Turn off the CX9400Fax Series.

2. Unplug the power cable.

3. Disconnect the USB cable.

4. Remove all the paper.

5. Clean the sheet feeder using a soft brush.

6. Clean the scanner glass with a soft, lint-free cloth moistened

with a little glass cleaner.

Caution:

Do not spray glass cleaner directly on the glass.

7. Clean the LCD screen with a soft, dry cloth. Do not use

liquid or chemical cleansers.

8. Clean the document cover with a soft, non-abrasive

microfiber-type cloth.

9. Close the document cover and paper support, then clean the

outer case with a soft cloth dampened with mild detergent.

Transporting the CX9400Fax Series

If you need to ship your CX9400Fax Series or transport it a

long distance, prepare it for transportation as follows:

1. Turn off the CX9400Fax Series.

2. Unplug all the connected cables.

3. Remove all the paper.

4. Close the paper support and output tray.

5. Lift up the scanner and check that the ink cartridge holder

is all the way to the right (the home position). If necessary,

turn on the CX9400Fax Series, then turn it off again.

Finish

6. Fasten the ink cartridge holder to the case using tape. Leave

the ink cartridges installed to avoid damaging the printer.

7. Close the scanner.

8. Pack the CX9400Fax Series in its original box or one of a

similar size using protective material to keep it from moving

inside the box.

9. Keep the CX9400Fax Series level during transportation to

prevent damage.

10. After unpacking the CX9400Fax Series, remove the tape

securing the ink cartridge holder.

If print quality has declined when you print again in a new

location, clean (see page 13) and align (see page 15) the print

head.

Epson CX9475Fax - Stylus Color Inkjet Manual - Página 16

Related Documentation