B2 Audio M1 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Amplificador B2 Audio M1. B2 Audio M1 10 páginas.

Imprimir página

1. Design features

Circuit Configuration

Frequency Response

Signal to Noise Ratio

Input Sensitivity

Input Level Selector

Crossover

High Pass Filter

High Pass Multiplier

Low Pass Crossover Range

Low Pass Multiplier

Subsonic Crossover Range

Bass Boost

Phase

Output Master / Input Slave

Remote Control

Damping Factor

Power Terminal gauge

Fuse Rating

All features are subject to change in the continuing effort to improve the products without notice.

Specifications

Continious output power rating (RMS) - Measured @ 14.4 V, 16 V & 18 V

Power @ 4

2600 W x 1

3300 W x 1

4000 W x 1

Specifications (detailed)

The amplifier,operates stable @ impedances of minimum 1

A daisy chain (linked) configuration will require a minimum 2 .

2) The amplifier is designed with a 4 stage advanced protection circuit;

Thermal protection, Voltage sensors, DC offset & short circuitry via speaker outputs

The double sided pcb features high current mosfet switching devices in both the in- and output stage.

The crossover of the M1 is a 24 dB/octave filter.

- which features low pass & subsonic options for the amplifier.

5) A wired remote level control is included for the

- This unit will enable remote gain adjustment.

- For more advanced features like selectable bass frequency, boost level & gain,

the

Better Bass Remote

6) A Daisy chain configuration of the amplifier will allow strapping of 2 amplifiers @ a

This will produce twice the power of one single unit @ 1

HI-EF Class D Mono

: 20Hz ~ 250Hz

: 100dB

: 6V ~ 0.2V

: 24dB / Oct

: 35Hz ~ 250Hz

: 10Hz ~ 50Hz

: 0 ~ 9dB

: 0 ~ 180

: 350<

: 0 ga x 2

: 750A

Power @ 2

4800 W x 1

5800 W x 1

6900 W x 1

(optional) can be used.

(Linked: 1500A)

Power @ 1

8500 W x 1

9100 W x 1

9500 W x 1

load.