Epson ES-300C Boletín de asistencia sobre productos - Página 4

Navegue en línea o descargue pdf Boletín de asistencia sobre productos para Escáner Epson ES-300C. Epson ES-300C 25 páginas. Laser & non-impact printer error codes
También para Epson ES-300C: Boletín de asistencia sobre productos (19 páginas), Manual (8 páginas), Manual complementario (15 páginas), Manual (11 páginas), Boletín de asistencia sobre productos (20 páginas), Boletín de asistencia sobre productos (14 páginas), Boletín de asistencia sobre productos (13 páginas)

EPL-6000 cont.

ERROR 33

ERROR 40

FONT CARD ERROR

INSERTION ERROR

PAPER EMPTY

PAPER JAM

PAPER SIZE ERROR

PS CHANGE

EPL-7000 LCD Codes

NOTE:

In some cases, the red CONTINUE light flashes when an error is detected.

This requires you to correct the problem and then press the CONTINUE

button to dear the error. However, if the AUTO CONT option in SelecType is

set to ON, some errors may clear automatically even though the problem

remains.

Status messages are preceded by [S], warning messages are preceded by

[W], and error messages are preceded by [E]. In some cases the message

you see on your display also shows the printer mode.

[E] ADD MEMORY FOR CH-X

The printer has insufficient memory available in the channel displayed.

[E] CARD MEMORY OVERFLOW

This message indicates that the combined memory requirement of the cards in

slots A and B exceeds 4 Mbytes.

Thermistor error

Parity / Framing error

Font cartridge is bad (or is not inserted) correctly

Paper is not inserted correctly or has jammed at the paper

tray

No paper in the paper cassette

Paper cassette is not installed properly

Paper cassette lid is open

Paper sensor is bad

Paper is jammed inside the printer

Paper setting does not match the size of the paper in the

paper cassette

Paper size requested by the host conflicts with the

SelecType setting

PSB No: P-0077

Page: 3 of 11