B2 Audio SLD5K Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Amplificadores B2 Audio SLD5K. B2 Audio SLD5K 12 páginas.
Imprimir página
Strapped control panel setting steps
SLD5k
To link the master and slave ampli er RCA connection follow the steps below.
Keep in mind ampli ers needs to be switched o , linking the ampli ers when switched on may cause harm and can void your warranty!
Step 1. Connect RCA from Head Unit / output source into master ampli er RCA input.
If only one output is available, then use a Y-split to connect both L & R.
Step 2. Locate the Master / Slave switch on the right side of the control panel on the Master ampli er.
Set the switch to Master position (unpressed).
step 3. Connect a single RCA from the RCA OUT on the master ampli er.
Step 4. Locate the Master / Slave switch on the right side of the control panel on the Slave ampli er.
Set the switch to Slave position (pressed).
Step 5. Connect the single RCA cable from the Master ampli er's Rca out to the slave ampli er's single RCA IN.
BASS
REMOTE
GAIN
SUBSONIC
BOOST
FREQ.
6V
0.2V
10Hz
50Hz
0dB
9dB
30Hz
90Hz 35Hz
R
L
INPUT
BASS
REMOTE
GAIN
SUBSONIC
BOOST
FREQ.
0.2V
10Hz
50Hz
0dB
9dB
30Hz
90Hz 35Hz
6V
L
R
INPUT
HEAD UNIT
LPF
PHASE
POWER
MASTER
PROTECT
250Hz
0
180
SLAVE
SPEAKER
OUTPUT
INPUT
MASTER
SLAVE
LPF
PHASE
POWER
MASTER
PROTECT
250Hz
0
180
SLAVE
SPEAKER
OUTPUT
INPUT
MASTER
SLAVE
10
*
Leave Master unpressed
*
Set slave as slave, button pushed in.