Cisco UCS B260 M4 Nota de instalación y mantenimiento - Página 38
Navegue en línea o descargue pdf Nota de instalación y mantenimiento para Servidor Cisco UCS B260 M4. Cisco UCS B260 M4 46 páginas. Blade server
También para Cisco UCS B260 M4: Nota de instalación y mantenimiento (50 páginas)
Imprimir página
Enabling the Trusted Platform Module
URL:
datasheet-listing.html
If you are switching from one type of adapter card to another, before you physically perform the switch make
sure that you download the latest device drivers and load them into the server's operating system. For more
information, see the firmware management chapter of one of the Cisco UCS Manager software configuration
guides.
Figure 23: Installing an Adapter Card
Procedure
Step 1
Position the adapter board connector above the motherboard connector and align the two adapter captive
screws to the standoff posts (see callout 1) on the motherboard.
Step 2
Firmly press the adapter connector into the motherboard connector (see callout 2).
Step 3
Tighten the two captive screws (see callout 3).
Tip
Enabling the Trusted Platform Module
The Trusted Platform Module (TPM) is a component that can securely store artifacts used to authenticate the
server. These artifacts can include passwords, certificates, or encryption keys. A TPM can also be used to
store platform measurements that help ensure that the platform remains trustworthy. Authentication (ensuring
that the platform can prove that it is what it claims to be) and attestation (a process helping to prove that a
platform is trustworthy and has not been breached) are necessary steps to ensure safer computing in all
environments. It is a requirement for the Intel Trusted Execution Technology (TXT) security feature, which
must be enabled in the BIOS settings for a server equipped with a TPM.
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs
30
http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-b-series-blade-servers/
Removing an adapter card is the reverse of installing it. You might find it helpful when removing the
connector from the motherboard to gently rock the board along the length of the connector until it
loosens.
Servicing the Blade Server