Cisco UCS B260 M4 Nota de instalación y mantenimiento - Página 23
Navegue en línea o descargue pdf Nota de instalación y mantenimiento para Servidor Cisco UCS B260 M4. Cisco UCS B260 M4 50 páginas. Blade server
También para Cisco UCS B260 M4: Nota de instalación y mantenimiento (46 páginas)
Imprimir página
Servicing the Blade Server
Figure 8: Removing and Installing a Drive
Step 2
Gently slide the hard drive into the opening in the blade server until it seats into place and the latch fully
engages.
Step 3
Push the hard drive lever into the closed position.
You can use Cisco UCS Manager to format and configure RAID services. See the UCS Manager configuration
guide for your software release for details on RAID configuration.
If you need to move a RAID cluster from one server to another, refer to the "Moving a RAID Cluster" section
of the "Troubleshooting Server Hardware" chapter of the Cisco UCS Troubleshooting Guide.
Removing a Blade Server Cover
Procedure
Step 1
Press and hold the button down as shown in the figure below.
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs
Removing a Blade Server Cover
15