Cisco UCS B460 M4 Nota de instalación y mantenimiento - Página 21

Navegue en línea o descargue pdf Nota de instalación y mantenimiento para Servidor Cisco UCS B460 M4. Cisco UCS B460 M4 46 páginas. Blade server
También para Cisco UCS B460 M4: Ficha de datos (7 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (5 páginas), Nota de instalación y mantenimiento (50 páginas)

Installing a Blade Server

removing a UCS B260 M4 blade server, you do not need to remove the UCS Scalability Terminator prior to

removing the UCS B260 M4 blade server.

Step 3

Completely loosen the captive screws on the front of the blade.

Step 4

Remove the blade from the chassis by pulling the ejector levers on the blade until it unseats the blade server.

Step 5

Slide the blade part of the way out of the chassis, and place your other hand under the blade to support its

weight.

Step 6

Once removed, place the blade on an antistatic mat or antistatic foam if you are not immediately reinstalling

it.

Step 7

If the blade server slot is to remain empty, reinstall the slot divider and install two blade server blanking

panels.

Server Troubleshooting

For general troubleshooting information, see the

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs

Cisco UCS Manager Troubleshooting Reference

Server Troubleshooting

Guide.