Epson Expression 10000XL Series Especificaciones - Página 3

Imprimir página

Epson Expression 10000XL Series Especificaciones

Transparency Unit (B12B813362)

Film types

35 mm strips or slides

Medium format (120/220) 6 × 18 cm

4 × 5 inch film

transparencies up to 12.2 × 16.5 inch

Maximum

12.2 × 16.5 inches (309 × 420 mm)

scan area

Dimensions

Width: 25.8 inches (656 mm)

Depth: 18.1 inches (460 mm)

Height: 1.6 inches (40 mm)

Weight:

11 lbs (6 kg)

Electrical

24 VDC, 1.3 A

5 VDC, 0.3 A

The TPU comes with two film holders of each type. Each film

holder can hold the following number of images:

Film type

35 mm slides

35 mm strips

Medium format (6

18 cm)

5 inch film

Automatic Document Feeder (B813212)

Paper input/

output

Load face-up; eject face-down

Paper quantity

100 pages (55 g/m

thickness under 0.48 inches [12 mm])

100,000 sheets (load/eject MCBF)

Speed

10 ppm (monochrome, draft mode at

200 dpi)

Dimensions

Width: 23.8 inches (606 mm)

Depth: 19.2 inches (488 mm)

Height: 5.3 inches (134 mm)

Weight

Approximately 28.7 lb (13 kg)

Electrical

24 VDC, 1.5 A

5 VDC, 0.4 A

System Requirements

This section lists minimum system requirements. For

optimum performance, a faster processor and more memory

are recommended. When scanning high resolution images,

you need more than the minimum available hard disk space.

Note: Color and tone reproduction are subject to the display

capability of your computer system, including the video card, monitor,

and software. See the documentation for these products for details.

Quantity per holder

paper, max. total

5/04

Epson Expression 10000XL

Windows

❏ Microsoft Windows

-compatible Pentium-II processor, 266

MHz or faster

❏ Preinstalled Windows 98SE, Me, 2000, or XP

❏ USB (1.1 or 2.0) or IEEE 1394 (FireWire) port. To use the

scanner's optional network card, your computer must be

connected to an existing network using TCP/IP.

USB 1.1 and 2.0 require a preinstalled Windows operating

system; USB 2.0 works with Windows XP and 2000 only

IEEE 1394 requires Windows Me, 2000, or XP; card must

be IEEE1394a-2000 compatible and OHCI compliant

❏ 128MB RAM (512MB RAM recommended)

❏ 300MB available hard disk space

❏ CD-ROM drive

❏ VGA color monitor with 800 × 600 resolution (1024 × 768

or higher recommended)

❏ 16-bit, 65K-color display adapter card (24-bit display

adapter card with millions of colors recommended)

Macintosh

❏ Macintosh

PowerPC G3; Power Mac

or faster processor recommended

❏ OS 9.1 to 9.2 or OS X 10.2.x to 10.3.x

Note: Check the Apple web site for any updates to your

operating system. Fast User Switching is not supported for

Mac OS X 10.3 users.

❏ USB (1.1 or 2.0) or IEEE 1394 (FireWire) port. To use the

scanner's optional network card, your computer must be

connected to an existing network using TCP/IP.

USB 2.0 requires Mac OS X 10.2.7 or later

IEEE 1394 requires IEEE1394a-2000 compatible and

OHCI-compliant interface card; make sure FireWire 2.1 or

later is installed on your computer

❏ 128MB RAM (512MB RAM recommended)

❏ 300MB available hard disk space

❏ CD-ROM drive

❏ VGA color monitor with 800 × 600 resolution (1024 × 768

or higher recommended)

❏ 16-bit 65K-color display adapter card (24-bit display

adapter card with millions of colors recommended)

G5 with 500 MHz

Epson Expression 10000XL - 3