Cisco ADSL Gateway Instalación rápida - Página 6
Navegue en línea o descargue pdf Instalación rápida para Pasarela Cisco ADSL Gateway. Cisco ADSL Gateway 6 páginas. Linksys adsl gateway
También para Cisco ADSL Gateway: Manual de instalación rápida (6 páginas)
Imprimir página
RFC 1483 Bridged - Static IP Address
1.
For the IP Setting, select Use the
Following IP Address.
2.
Enter the IP Address, Subnet Mask,
and Default Gateway IP address.
3.
In the Primary and/or Secondary
DNS fields, enter at least one DNS IP
address.
4.
Click Save Settings.
Bridge Mode Only
This mode is used only if you are using
the Gateway as a bridge, which makes
the Gateway act like a stand-alone
modem. Click Save Settings.
G.
To test the setup, enter
www.linksys.com/registration in
the web browser's Address field, and
press Enter.
NOTE FOR WIRELESS GATEWAYS:
the CD-ROM for instructions on wireless configuration. Linksys
recommends that you change the wireless settings from the defaults
and enable the appropriate security method.
Congratulations! The installation of the Gateway is complete.
For additional information or troubleshooting help, refer to the User Guide on the CD-ROM.
Additional support is also available via e-mail or by phone.
Website
http://www.linksys.com/international
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its
affiliates in the U.S.. and certain other countries. Copyright © 2007 Cisco Systems, Inc.
All rights reserved. Other brands and product names are trademarks or registered
trademarks of their respective holders.
70222NC-JL
RFC 1483 Bridged - Static IP Address
RFC 1483 Bridged - Static IP Address
Bridge Mode Only
Bridge Mode Only
Refer to the User Guide on
Product Registration
http://www.linksys.com/registration