Cisco AS5850 Manual de instalación del hardware - Página 2
Navegue en línea o descargue pdf Manual de instalación del hardware para Pasarela Cisco AS5850. Cisco AS5850 30 páginas. Universal gateways
También para Cisco AS5850: Manual de consulta rápida (38 páginas)
Imprimir página
If You Already Have a Cisco AS5800
If You Already Have a Cisco AS5800
If you already have a Cisco AS5800, the Cisco AS5850 should be easy to adjust to. The following major
differences should be noted:
•
•
•
•
•
•
•
•
System Components
The following sections in this chapter describe the core system components:
•
•
•
The Cisco AS5850 is designed to be rack-mounted. A rack-mount kit is included with each
Cisco AS5850. Each rack-mount kit provides the hardware needed to mount the chassis in a standard,
19-inch equipment rack or standard telco rack. If you plan to use a 23-inch equipment rack, you must
provide your own brackets or shelves to accommodate the Cisco AS5850 and optional AC power shelf.
For clearance requirements and rack-mount installation considerations, refer to the section
"Site
Figure 1-1
shows a rear view.
Cisco AS5850 Universal Gateway Hardware Installation Guide
1-2
The cooling module is 1 RU shorter.
The Dial Shelf Controller (DSC) and Cisco 7206 router shelf were replaced with a route switch
controller (RSC) card, which goes in slots 6 and 7, not 12 and 13 (as with the DSC).
There is a new 2400-watt power shelf. This power module can use three 120V 15A connections or
three 240V 10A connections, depending on what is available at your site.
Because the chassis is shorter, and a separate router shelf (or two) are no longer needed, three
Cisco AS5850 gateways can fit in a standard rack, when DC-powered.
The separate power entry module (PEM) and power filter have been integrated into a single unit
(PEMF).
Trunk cards can be used in any feature card slot.
All modems are universal ports and support voice, data, or fax connections. For details about
universal ports, refer to the Cisco AS5850 Universal Gateway Card Guide, and the Cisco AS5850
Operations, Administration, Maintenance, and Provisioning Guide (available online at the
following URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5850/sw_conf/5850oamp/
index.htm.)
Command syntax has shifted slightly. Because you no longer need to distinguish the Cisco 5814 dial
shelf from the Cisco 7206 router shelf, commands using the shelf/slot/port syntax are shortened to
slot/port. The shelf abstraction is no longer needed.
Cisco AS5850 Chassis, page 1-9
Field-Replaceable Units
For information about the feature cards used in the Cisco AS5850, refer to the Cisco AS5850
–
Universal Gateway Card Guide that shipped with your system. For information about other
FRUs, review the rest of this chapter, or for detailed specification tables, refer to Appendix A,
"Cisco AS5850 Specifications", page 1-14
–
Route Switch Controller Card, page 1-14
DC-Input Power Entry Module, page 1-23
–
Power Requirements, page 1-28
Requirements" in
Chapter 2, "Preparing for Installation."
shows a front view of a Cisco AS5850 with the optional 2400W power shelf, and
Chapter 1
Cisco AS5850 Product Overview
Figure 1-2
78-10573-06 0A