Cisco ASR 5000 Manual de instalación - Página 17

Navegue en línea o descargue pdf Manual de instalación para Pasarela Cisco ASR 5000. Cisco ASR 5000 18 páginas. Applying power and verifying the installation
También para Cisco ASR 5000: Manual de instalación (33 páginas), Procedimiento de instalación (8 páginas), Manual de instalación (37 páginas)

Imprimir página

Chassis Installation

d) Replace the fan tray bay cover/EMI shield. The perpendicular tabs on the cover should face away from the chassis

and be positioned at the bottom. Use a Phillips #1 screwdriver to hand tighten the four captive screws in an alternating

pattern – upper left, lower right, lower left, upper right (5 inch-lb, 0.5 N-m). Do NOT use an electric or pneumatic

torque driver to tighten these screws.

e) Replace the lower plastic bezel: align it over the bezel mounts that protrude from the fan tray bay cover and snap it

in place.

Step 3

Re-install the upper fan tray.

a) Hold the front of the fan tray by its sides and align it with the upper fan tray bay of the chassis. The upper fan tray

bay is located at the upper-front of the chassis.

b) Slowly slide the fan tray into the chassis along the guides until its face plate is firmly against the chassis.

c) Use a Phillips #1 screwdriver to tighten the four screws on the face of the fan tray to secure it.

Re-Installing Chassis Sub-components

ASR 5000 Installation Guide