Cisco ASR 9000 Series Configuración de - Página 15

Navegue en línea o descargue pdf Configuración de para Pasarela Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 páginas. Line card
También para Cisco ASR 9000 Series: Configuración de los ajustes de red (26 páginas), Manual de configuración (46 páginas), Manual de configuración (50 páginas), Manual (24 páginas), Manual (44 páginas), Manual de consulta rápida (7 páginas)

Imprimir página
Cisco ASR 9000 Series Configuración de
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Command or Action
Step 16
root
Example:
RP/0/RSP0/CPU0:router(config-t3)# root
Step 17
interface serial interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface
serial 0/1/1/0/0/0:0
Step 18
encapsulation {frame-relay | hdlc | ppp}
Example:
RP/0/RSP0/CPU0:router(config-if)#
encapsulation ppp
Step 19
ipv4 ip-address mask
Example:
RP/0/RSP0/CPU0:router(config-if)# ip
address 10.10.10.10 255.255.255.255
Step 20
no shutdown
Example:
RP/0/RSP0/CPU0:router(config-if)# no
shutdown
OL-26061-03
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Purpose
Exits to global configuration mode.
Specifies the complete interface number with the
rack/slot/module/port/T3Num/T1num:instance notation.
Specifies the encapsulation type with the one of the following
keywords:
frame-relay—Frame Relay network protocol
•
hdlc—High-level Data Link Control (HDLC) synchronous
•
protocol
ppp—Point-to-Point Protocol
•
Assigns an IP address and subnet mask to the interface.
Removes the shutdown configuration.
Removal of the shutdown configuration eliminates the
Note
forced administrative down on the interface, enabling it to
move to an up or down state (assuming that the parent
SONET layer is not configured administratively down).
How to Configure Channelized SONET/SDH
HC-331