Cisco ASR 9000 Series Configuración de - Página 26
Navegue en línea o descargue pdf Configuración de para Pasarela Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 páginas. Line card
También para Cisco ASR 9000 Series: Configuración de los ajustes de red (26 páginas), Manual de configuración (46 páginas), Manual de configuración (50 páginas), Manual (24 páginas), Manual (44 páginas), Manual de consulta rápida (7 páginas)
Imprimir página
How to Configure Channelized SONET/SDH
Restrictions
Channelized SDH AU-3 with c11-t1 or c12-e1 mapping is supported on the following SPAs:
•
•
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
controller sonet interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# controller
sonet 0/1/1/0
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
HC-342
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 2-Port Channelized OC-12c/DS0 SPA
configure
controller sonet interface-path-id
clock source {internal | line}
framing sdh
au number
mode mode
root
controller t1 interface-path-id
channel-group number
timeslots num1:num2:num3:num4
or
timeslots range1-range2
show configuration
root
interface serial interface-path-id
encapsulation {frame-relay | hdlc | ppp}
ipv4 ip-address mask
no shutdown
end
or
commit
show controllers sonet interface-path-id
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Purpose
Enters global configuration mode.
Enters SONET controller configuration submode and specifies the
SONET controller name and interface-path-id identifier with the
rack/slot/module/port notation.
OL-26061-03