Cisco ASR 9000 Series Configuración de - Página 36
Navegue en línea o descargue pdf Configuración de para Pasarela Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 páginas. Line card
También para Cisco ASR 9000 Series: Configuración de los ajustes de red (26 páginas), Manual de configuración (46 páginas), Manual de configuración (50 páginas), Manual (24 páginas), Manual (44 páginas), Manual de consulta rápida (7 páginas)
Imprimir página
How to Configure Channelized SONET/SDH
Command or Action
Step 12
mode mode
Example:
RP/0/0/CPU0:router(config-e3)#mode e1
Step 13
root
Example:
RP/0/0/CPU0:router(config-e3)# root
Step 14
controller name instance
Example:
RP/0/0/CPU0:router(config)# controller E1
0/1/1/0/0/0/0/0
Step 15
channel-group number
Example:
RP/0/0/CPU0:router(config-e1)#
channel-group 0
Step 16
timeslots num1:num2:num3:num4
or
timeslots range1-range2
Example:
RP/0/0/CPU0:router(config-e1-channel_grou
p)# timeslots 1:3:7:9
RP/0/0/CPU0:router(config-e1-channel_grou
p)# timeslots 1-12
Step 17
show configuration
Example:
RP/0/0/CPU0:router(config-e1-channel_grou
p)# show configuration
Step 18
root
Example:
RP/0/0/CPU0:router(config-e1-channel_grou
p)# root
Step 19
interface serial interface-path-id
Example:
RP/0/0/CPU0:router(config)# interface
serial 0/1/1/0/0/0:0
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
HC-352
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Purpose
Sets the mode of interface. The modes are:
•
e1—Channelized into 21 E1s
•
serial—Clear Channel carrying HDLC-like payload
t1—Channelized into 28 T1s
•
T1 and E1 are not supported on the 1-Port Channelized
Note
OC-48/STM-16 SPA.
Exits to global configuration mode.
Enters controller configuration submode and specifies the
controller name and instance identifier with the
rack/slot/module/port/name/instance1/instance2 notation. The
controller names are:
serial—Clear Channel carrying HDLC-like payload.
•
t1—Channelized into 24 T1s.
•
Sets the channel-group number to which time slots are assigned.
For t1, the range is from 1 to 24.
•
For e1, the range is from 1 to 32.
•
Specifies time slots for the interface by number with the
num1:num2:num3:num4 notation, or by range with the
range1-range2 notation.
Displays the contents of uncommitted configuration.
Exits to global configuration mode.
Specifies the complete interface number with the
rack/slot/module/port/T3Num/T1num:instance notation.
OL-26061-03