Cisco ATA 186 Configuración - Página 3

Navegue en línea o descargue pdf Configuración para Pasarela Cisco ATA 186. Cisco ATA 186 6 páginas. Analog telephone adaptor
También para Cisco ATA 186: Configuración (28 páginas), Ficha de datos (7 páginas), Visión general (11 páginas), Manual general (11 páginas), Manual de configuración (8 páginas), Manual del usuario (12 páginas), Manual de instalación y configuración (13 páginas), Instrucciones de instalación (6 páginas)

UID0, UID1 to be set to user's PIN. Don't use same PIN for both fields.

Keep PWD0, PWD1 blank. You will see a black dot if this field is made blank.

GkOrProxy to be set to 202.54.117.212.

10) Set UseLoginID to 1.

11) Make LoginID0, LoginID1 same as UID0 and UID1 respectively.

12) GkId is to be specified: in our case it is NexgeGK.

13) UseSIP is set to 0 if your ATA is having image V2.16 or 2.15 which supports both SIP & H.323. If your ATA is having image

V3.1.x which supports only H.323 then you don't need to bother about this parameter as it won't be there.

14) DNS1IP & DNS2IP to be set to 202.54.1.30 & 202.54.1.18 respectively if it is on public IP , else you

DNS server IP for the same.

15) Make sure that LBRCodec, RxCodec, TxCodec are set to 0.

16) Make sure ConnectMode is set to 0x00060401 .

17) Set "Polarity" to "0x00000001 " (this is required if you are connecting a billing maching to the ATA for billing like the way

it is done in PCO/STD/ISD booth)

18) Leave all other fields to their default value.

After entering these values, click on the "Apply" button at the bottom and then "Click here to reload" button at the top to update

the website with these settings.

A sample of how the website looks is given below (please note that you have to enter data specific to your device for correct

configuration):

Cisco ATA with image V3.1.x(H323)

ata000e8349dd31

Version: v3.1.1 atah323 (Build 040629A)

MAC: 0.14.131.73.221.49

SerialNumber: INM074715XA

Cisco ATA 186 (H323) Configuration

can use the customer's own