Digitus professional DN-16100-2 Manual de inicio rápido - Página 4
Navegue en línea o descargue pdf Manual de inicio rápido para Servidor Digitus professional DN-16100-2. Digitus professional DN-16100-2 12 páginas. H.264 multi-profile video server
Imprimir página50 mm SlimLine Half Coupler 100 kg
Only operate the device after having familiarized with its functions.
Only move a load, after having made sure that the load is safely and correctly attached and that
there are no persons within the immediate vicinity of the hoist and/or the load.
Only use the coupler within the designed tube parameters (48-51 mm).
Avoid flames and do not put close to flammable liquids or gases.
Make sure that the device is not exposed to extreme heat, moisture or dust.
If device was dropped or struck, discontinue the use of the device. Have a qualified engineer
inspect for safety before operating.
If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
It is not recommended to use couplers which do not fully encompass the tube for overhanging.
For adult use only. The device must be installed beyond the reach of children.
For semi-permanent installation applications, check integrity of welds, joints and coupler's tightness
weekly.
The user is responsible for correct positioning and operating of the coupler. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
Applications that are not described in this manual, are not allowed.
Installation, repairs and servicing must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
Operating Determinations
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
Any other operation may lead to serious damage and/or severe injuries.
You endanger your own safety and the safety of others!
Not permitted use
List of applications which the Half Coupler is not allowed to be used for.
Please note, that when an application is not included in this list, it does not mean that the use of the Half
Coupler is allowed. When in doubt, consult your Showtec dealer.
The use of lifting equipment for the transport of people is not permitted.
The "pulling loose" of jammed loads is prohibited.
Welding on the coupler is prohibited.
The hoisting or transporting of loads should be avoided, if there is anybody within the range of the
load.
It is prohibited to stay under a suspended load.
Loads should not be prolonged or unattended in a raised position.
The use of the couplers in a potentially explosive atmosphere is prohibited.
The coupler is not designed for continuous use.
Do not drop the coupler; the coupler should always be properly stored.
A defective or damaged coupler must not be used.
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself!
Always have the inspections carried out by an authorized dealer!
Ordercode: 75001S/75001B
3