Cisco Linksys WAG310G Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Pasarela Cisco Linksys WAG310G. Cisco Linksys WAG310G 39 páginas. Wireless-g adsl2+ iad gateway
Imprimir página
Chapter3
will automatically re-establish your connection. To use
this option, select Keep Alve. In the Redial Period field,
you specify how often you want the Gateway to check
the Internet connection. The default Redial Period is
30 seconds.
RFC 1483 Routed
If you are required to use RFC 1483 Routed, then select
RFC 183 Routed.
Internet Connection Type > RFC 1483 Routed
IP Settings
Your ISP provides these settings.
Internet IP Address
Enter the Gateway's IP address, as
seen from the Internet.
Subnet Mask
Enter the Gateway's Subnet Mask, as seen
from the Internet (including your ISP).
Default Gateway
Enter the IP address of the ISP server.
Prmary
(Requred)
and
DNS
Enter the DNS (Domain Name System) server IP
address(es) provided by your ISP. At least one is required.
IPoA
If you are required to use IPoA (IP over ATM), then select
IPoA.
Internet Connection Type > IPoA
Wreless-G ADSL2+ IAD Gateway
Secondary
(Optonal)
Advanced Configuration
IP Settings
Your ISP provides these settings.
Internet IP Address
Enter the Gateway's IP address, as
seen from the Internet.
Subnet Mask
Enter the Gateway's Subnet Mask, as seen
from the Internet (including your ISP).
Default Gateway
Enter the IP address of the ISP server.
Prmary
(Requred)
and
DNS
Enter the DNS (Domain Name System) server IP
address(es) provided by your ISP. At least one is required.
RFC 1483 Bridged
If you are required to use RFC 1483 Bridged, then select
RFC 183 Brdged.
Internet Connection Type > RFC 1483 Bridged
IP Settings
Select Obtan an IP Address Automatcally if your ISP
says you are connecting through a dynamic IP address.
If you are required to use a permanent (static) IP address
to connect to the Internet, then select Use the followng
IP Address. Your ISP provides the settings needed for the
following fields:
Internet IP Address
Enter the Gateway's IP address, as
seen from the Internet.
Subnet Mask
Enter the Gateway's Subnet Mask, as seen
from the Internet (including your ISP).
Default Gateway
Enter the IP address of the ISP server.
Prmary
(Requred)
and
DNS
Enter the DNS (Domain Name System) server IP
address(es) provided by your ISP. At least one is required.
Bridge Mode Only
If you are using your Gateway as a bridge, which makes
the Gateway act like a stand-alone modem, select Brdge
Secondary
(Optonal)
Secondary
(Optonal)
9