Cisco S395 Manual de instalación del hardware - Página 48

Navegue en línea o descargue pdf Manual de instalación del hardware para Pasarela Cisco S395. Cisco S395 50 páginas. Web security appliance
También para Cisco S395: Manual de introducción (18 páginas), Manual (24 páginas)

Cisco S395 Manual de instalación del hardware
Remove and Replace a Power Supply
Warning
Warning
Warning
Warning
Step 1
Remove the power supply that you are replacing or the blank panel from an empty bay:
a) Do one of the following actions:
• If the chassis has one power supply, shut down and remove power from the chassis. See
Down, on page 37
• If the chassis has two power supplies, you do not have to shut down the chassis.
b) Remove the power cord from the power supply that you are replacing.
c) Grasp the power supply handle while pinching the release lever toward the handle.
d) Pull the power supply out of the bay.
Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide
44
Statement 1024 Ground Conductor
This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor
or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate
electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.
Statement 1030 Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Statement 1074 Comply with Local and National Electrical Codes
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
for the procedure.
Maintenance and Upgrades
Power Button Shut