Cisco VG400 series Manual de configuración del software - Página 16
Navegue en línea o descargue pdf Manual de configuración del software para Pasarela Cisco VG400 series. Cisco VG400 series 22 páginas. Voice gateway
También para Cisco VG400 series: Manual de instalación del hardware (40 páginas), Instalación de (13 páginas)
Imprimir página
Enabling UC License
DETAILED STEPS
Command or Action
Step 1
Router> enable
Example:
Password: password
Example:
Router#
Step 2
Router# copy running-config startup-config
Step 3
Router(config-if)# Ctrl-z
Example:
Router#
Example:
%SYS-5-CONFIG_I: Configured from console by console
Enabling UC License
To enable the UC license in the Cisco VG400 Voice Gateway, perform the following steps:
Summary Steps
1. enable
2. configure terminal
3. license accept end user agreement
4. license boot level uck9
5. exit
6. save
7. reload
Detailed Steps
SUMMARY STEPS
1. enable
2. configure terminal
3. license accept end user agreement
4. license boot level uck9
5. exit
Cisco VG400 Voice Gateway Software Configuration Guide
10
Configuring with the Command-Line Interface
Purpose
Enables privileged EXEC mode.
• Enter your password, if prompted.
Saves the configuration changes to NVRAM so that the
changes are not lost during resets, power cycles, or power
outages.
Returns to user EXEC mode.