Digiway SW50 Manual de instrucciones - Página 2
Navegue en línea o descargue pdf Manual de instrucciones para Abrepuertas de garaje Digiway SW50. Digiway SW50 5 páginas. Dual motor controller
También para Digiway SW50: Manual de instrucciones (14 páginas)
Imprimir página
1. General Descriptions and features
General descriptions
1.1
It is recommended reading and understanding this manual before start to install the control board.
Some features and idea are new. So take some time to read through the manual to get better
understanding of the board. That will save your time during installation and get the best benefit
from the control board.
Electricity and power motors associated accessories could be fatal or at least cause seriously injury.
Digiway suggested some safety device to be used so as to prevent personnel from being injured by
motorized device being controlled. All main voltage wiring must be installed by a licensed
electrician.
1.2 General features
The SW50 is an economical gate controller able to control dual motors with limit switch in a
variety of settings. Typical applications include Swing gates, Sliding Gates, Roller shutter doors.
Features include the following:
•
Control one or two 12 or 24V DC motors.
•
Limit switch inputs, N/C
•
Lock or lights, audio warning output.
•
Adjustable timers for open/close cycle and auto close timing.
•
Pedestrian cycle, to provide partially open one gate leaf in case of sawing gate.
•
Safety control inputs.
•
Time delay for leading swing gates.
2. Description of standard operations
2.1 View of Control board
1
2
8
9
3
4
5
6
1
10
11
- 2 -
7
12
13
14
15