DigiWeigh DW97PBM04 Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Scales DigiWeigh DW97PBM04. DigiWeigh DW97PBM04 16 páginas. Digital counting scales

OPTION SETTINGS

Unit Weight Recalculation, Enable or disable automatic update of

the unit weight.

0 - Disabled

1 – Automatic. The unit weight wil be averaged again if you

add items gradually. This will eliminate errors caused by the

possible weight variation among objects. When adding more

items to the scale, add less than are currently on the scale.

The scale will beep when the unit weight is averaged again.

Remember, a sampling operation must be done to obtain the

initial unit weight.

PASS

Check Alarm Type. The alarm sounds when the count or weight

falls either inside or outside the preset range.

0 – Outside

1 - Inside

SCALE CALIBRATION

You must have a calibration weight that is calibrated in grams, kilograms, or

pounds to calibrate the scale.

The scale will be calibrated in kilograms while set to the KG mode, and in

pounds while set to the Pound mode.

 Turn on scale, and let it warm up for at least 15 minutes, longer is

better.

 Press and continue holding down the ZERO key until the word CAL

appears in the COUNT/PCS Display. The Unit Weight Display will

show the size of the calibration weight in KG or LB depending on the

units the scale is using.

 If the calibration weight being used is different from the display, enter

the appropriate value

 Place the weight on the scale and the Unit Weight will start blinking.

When finished, the scale will return to the normal operating mode.

 Press ZERO to escape from the calibration mode at any time.

Page 15 of 16