DigiWeigh DW98PAH04 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Scales DigiWeigh DW98PAH04. DigiWeigh DW98PAH04 16 páginas. Digital counting scales

OPERATION

You can press the ZERO key at any time to set the zero point from which all

other weighing and counting is measured, It is active within 4% of power up

zero. This will usually only be necessary when the platform is empty. When

the zero point is obtained the Weight display will show the indicator for zero.

The scale has an automatic re-zeroing function to account for minor drifting or

accumulation of material on the platform. However you may need to press

ZERO to re-zero the scale if small amounts of weight are shown when the

platform is empty.

There are two methods to enter a tare value. The first uses the weight on the

platform and the second uses a value input by the user.

 Zero the scale by pressing the ZERO key if necessary. The zero

indicator will be on.

 Place a container on the platform, a value for its weight will be

displayed.

 Press the TARE key to tare the scale. The weight that was displayed is

stored as the tare value and that value is subtracted from the display,

leaving zero on the display.

 The "Net" indicator will be on. As product is added only the weight of

the product will be shown. The scale could be tared a second time if

another type of product was to be added to the first one. Again only the

weight that is added after taring will be displayed.

 When the container is removed, a negative value will be shown. If the

scale was tared just before removing the container this value is the

gross weight of the container plus all product that was removed. The

zero indicator will also be on because the platform is back to the same

condition it was when the ZERO key was last pressed.

 Press the TARE key again to remove the tare weight .

 This method allows you to enter a value for the tare weight from the

keypad. This is useful if all containers weigh the same, or if the

container is already full but the net weigh is required and the tare

weight of the container is known.

Page 9 of 16