Epson CPD-8407 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Accesorios para impresoras Epson CPD-8407. Epson CPD-8407 44 páginas. Color calibrator

Safety Instructions

Read these instructions before using your Color Calibrator, and

save them for later reference. Follow all warnings and instructions

in this User's Guide .

Unplug the AC adapter before cleaning. Clean with a damp

cloth only. Do not spill liquid on the calibrator.

Do not place the calibrator on an unstable surface, or near a

radiator or heat source.

Do not insert objects into the sensor tip.

Use only the type of power source indicated on the AC

adapter's label.

Connect all equipment to properly grounded power outlets.

Avoid using outlets on the same circuit as photocopiers or air

control systems that regularly switch on and off.

Do not let the power cord become damaged or frayed.

If you use an extension cord with the AC adapter, make sure

the total ampere rating of the devices plugged into the

extension cord does not exceed the cord's ampere rating. Also,

make sure the total ampere rating of all devices plugged into

the wall outlet does not exceed the wall outlet's ampere rating.

Do not attempt to service the products yourself.

Unplug the AC adapter and refer servicing to qualified

service personnel under the following conditions:

If the power cord or plug is damaged; if liquid has entered the

AC adapter; if the AC adapter has been dropped or the cabinet

damaged; if the AC adapter does not operate normally or

exhibits a distinct change in performance. (Do not adjust

controls that are not covered by the operating instructions.)

Introduction