Epson CX5400 - Stylus Color Inkjet Manual - Página 4

Navegue en línea o descargue pdf Manual para Accesorios para impresoras Epson CX5400 - Stylus Color Inkjet. Epson CX5400 - Stylus Color Inkjet 11 páginas. Product support bulletin(s)
También para Epson CX5400 - Stylus Color Inkjet: Manual de consulta rápida (40 páginas), Hoja de información del producto (4 páginas), Manual Start Here (8 páginas), Instalación del software (8 páginas), Manual Start Here (8 páginas), Actualización (1 páginas), Boletín de asistencia sobre productos (40 páginas), Boletín de asistencia sobre productos (17 páginas), Boletín de asistencia sobre productos (18 páginas)

Imprimir página

Epson CX5400 - Stylus Color Inkjet Manual

EPSON Stylus CX5400

Loading Paper

Single Sheets

1. Open the output tray and its extensions.

2. Flip the feeder guard forward.

3. Insert your paper against the right edge of the sheet feeder.

Slide the left edge

guide against the

paper

4. Slide the left edge guide against the paper (but not too

tightly).

5. Lower the feeder guard back over the paper.

Also be sure to:

❏ Load the printable side face-up. It's often whiter or brighter

than the other side.

❏ Load letterhead or preprinted paper top edge first.

❏ Don't load paper above the arrow on the left edge guide.

❏ Load up to approximately 100 sheets of plain paper at a

time.

EPSON Stylus CX5400

4 -

Open output tray

and extension

Flip feeder guard forward

Insert paper against

the right edge

Envelopes

1. Load up to 10 envelopes at a time, flap edge left, and

printable side up, against the right edge of the sheet feeder.

2. Slide the left edge guide against the envelopes (but not too

tightly).

3. Raise the scanner section as shown and set the paper

thickness lever to the ^ position (remember to set it back to

the m position when you're done).

Note:

For best results, press each envelope flat before loading, or load one

envelope at a time.

4. Lower the scanner section until it clicks into place.

5. Select the following settings:

❏

Plain paper

(Macintosh

) setting

❏ The correct envelope size as the Size (Windows) or

Paper Size (Macintosh) setting

❏

Landscape

8/03

Set the thickness

lever to the ^

position

as the Type (Windows

) or Media Type

as the Orientation setting