Epson CX6400 - Stylus Color Inkjet Información sobre el producto - Página 12

Navegue en línea o descargue pdf Información sobre el producto para Accesorios para impresoras Epson CX6400 - Stylus Color Inkjet. Epson CX6400 - Stylus Color Inkjet 14 páginas. Product support bulletin(s)
También para Epson CX6400 - Stylus Color Inkjet: Especificaciones (2 páginas), Manual de información (4 páginas), Hoja de información del producto (4 páginas), Manual Start Here (8 páginas), Manual Start Here (9 páginas), Manual de instalación (2 páginas), Actualización (1 páginas), Boletín de asistencia sobre productos (6 páginas), Boletín de asistencia sobre productos (1 páginas)

EPSON Stylus CX6400

3. When done, press the OK button.

When your ink starts getting low, make sure you have

replacement cartridges available. You cannot print if an ink

cartridge is empty.

Removing and Installing Ink Cartridges

Follow these steps to replace a cartridge:

1. Make sure the CX6400 is turned on and not printing.

2. If an ink cartridge is empty:

Check the LCD screen to see which cartridge is empty, then

press the x Color button.

If an ink cartridge is low:

Press the Setup button to enter Setup Mode, then press

the top left button next to the LCD screen until Replace

ink is displayed. Finally, press the x Color button.

3. Lift up the scanner section.

4. Wait for the ink cartridge holder to move to the

replacement position, then open its cover.

EPSON Stylus CX6400

12 -

5. Identify the cartridge you need to replace. Press in the tab at

the back of the cartridge to release it, then lift the cartridge

straight out. Dispose of it carefully.

Note:

The illustration above shows the black cartridge being removed.

Only remove the cartridge(s) you need to replace.

6. Before unwrapping the new cartridge, shake it gently four

or five times. Then remove it from its wrapper.

Caution:

Don't touch the green circuit board on the front of the cartridge;

you may inhibit normal operation and printing.

7. Lower the new cartridge into its holder, then press down

firmly until it clicks into place.

If you need to replace other ink cartridges, repeat steps 5

through 7 before continuing with step 8.

8. Close the cartridge cover.

Caution:

If you find it difficult to close the cover, make sure all the

cartridges are firmly seated. Press down on each newly installed

cartridge until you hear it click into place. Do not attempt to force

the cover closed.

9. Carefully lower the scanner section and press it down until

it clicks into place.

10/03