TomTom LINK 510 Manual de instalación - Página 16

Navegue en línea o descargue pdf Manual de instalación para GPS TomTom LINK 510. TomTom LINK 510 35 páginas. Vehicle tracking device
También para TomTom LINK 510: Manual del usuario (37 páginas), Manual de instalación (16 páginas)

Imprimir página

Mounting the LINK 510

Your LINK 510 comes with an integrated GSM antenna and an integrated GPS antenna.

Mount-

ing the

LINK

510

Depending on the position you choose for the installation, you can install your LINK 510

without external antennas.

To learn how to use external antennas with the LINK 510, see Appendix: Using external

antennas on page 27.

• The LINK 510 must be positioned so that it is unobstructed by metal objects.

• The device must not interfere with clear vision for the driver.

• Tinted metallised windscreens or those with integrated filament heating may block GPS

reception.

• Place the unit a minimum of 5 cm distance to the coachwork or other metal items, so

that optimal GSM transmission and GPS reception is ensured.

• The unit must be placed on an oil free, dry and clean surface, when using the adhesive

strips. Extreme temperature changes/differences can affect the adhesive property of

the strips.

• To find the right place read Safety first on page 4 and Choosing the correct position

on page 14.

The LINK 510 can be attached with the two adhesive strips, the two tapping screws or the

cable ties.

Attaching the holder using the adhesive strips

You can use the two adhesive strips to fix the LINK 510 to your vehicle. Follow the safety

instructions in this document.

1. Choose a flat surface for accurate positioning of the unit.

Remember, when the LINK 510 is in the holder, it must not be obstructed by metal

objects.

2. Clean the surface with the supplied cleaning tissue, so that the surface is oil free, dry

and clean.

3. Remove the protective film from one side of the strips.

4. Stick the strips to the bottom side of the holder as shown below.