TomTom LINK 510 Manual de instalación - Página 19

Navegue en línea o descargue pdf Manual de instalación para GPS TomTom LINK 510. TomTom LINK 510 35 páginas. Vehicle tracking device
También para TomTom LINK 510: Manual del usuario (37 páginas), Manual de instalación (16 páginas)

Imprimir página

10.

Testing operation

In addition to the tests described below you can also test the operation of your LINK 510

Test-

ing op-

eration

using the TomTom Business Solutions Diagnostic Tool with Bluetooth.

Power or Ignition test

Before testing the connection to power and to the ignition make sure you have carried out

the steps described in the previous chapters.

1. Please check all connections to the LINK 510 (wires, fuses etc.).

2. Turn off the ignition. The green LED must be off and then flash on every 3 seconds.

3. Turn on the ignition. The green LED must be on and then go off every 3 seconds. If the

device is already activated, see Activating the LINK 510 on page 11, the green LED

must be on all the time.

If the LED does not perform accordingly, see Diagnostics on page 22.

GPRS reception test

For this test, you may need to move the vehicle to a location with a clear view of the sky,

to make sure that you have adequate GPS and GPRS reception.

For this test put the LINK 510 in the position where you want to fix it (see Mounting the

LINK 510 on page 16).

1. Turn on the ignition.

2. Monitor the yellow LED. It must be on and go off every 3 seconds.

As soon as the device has established a connection to WEBFLEET the yellow LED stays on

all the time.

If the LED keeps flashing for longer than 10 minutes, see Diagnostics on page 22.