TomTom PRO 2020 Manual de instalación - Página 10
Navegue en línea o descargue pdf Manual de instalación para Sistema de navegación TomTom PRO 2020. TomTom PRO 2020 19 páginas. Compact driver terminal with a 2.5 inch touch screen
También para TomTom PRO 2020: Manual del usuario (27 páginas)
Imprimir página
Mounting the PRO 2020
You have the following options to mount your PRO 2020:
Using the adhesive tape, to stick it to a plane surface.
Using the air vent mount holder.
Using the TomTom universal suction mount, offered as an additional accessory (Art#
9KZ1.001.00), for on dashboard mounting.
Using any mounting accessory with a hole pattern compatible with the AMPS industry
standard.
Attaching the PRO 2020 using the adhesive strip
You can use the adhesive strip to fix the PRO 2020 to your vehicle. Follow the safety instructions
in this document.
1. Choose a flat surface for accurate positioning of the unit.
2. Clean the surface with the supplied cleaning tissue, so that the surface is oil free, dry and
clean.
3. Remove the protective film from one side of the strip.
4. Stick the strip to the bottom side of the mounting adapter shown below.
Important: Use the strip only in combination with the mounting adapter.
5. Remove the protective film from the other side of the strip.
6. Place the mounting adapter with the adhesive strip on the prepared surface. Press it gently for
a few seconds until it sticks.
Note: The full strength of the strip will be reached after approximately 72 hours depending
on the temperature.
10