Epson LQ-1170 Boletín de asistencia sobre productos - Página 8

Navegue en línea o descargue pdf Boletín de asistencia sobre productos para Accesorios para impresoras Epson LQ-1170. Epson LQ-1170 20 páginas. Understanding and using escp/3 commands and syntax
También para Epson LQ-1170: Manual (5 páginas), Boletín de asistencia sobre productos (20 páginas), Boletín de asistencia sobre productos (5 páginas), Resumen técnico (7 páginas), Manual de instalación (1 páginas), Manual de montaje (8 páginas), Boletín de asistencia sobre productos (16 páginas)

Imprimir página
Epson LQ-1170 Boletín de asistencia sobre productos
C ( V m1 m2 n1 n2 is the command for changing the print position vertically (with
respect to the Top of Form position) in units where m1, m2, n1 and n2 are variables.
command. Currently, the values for m1 and m2 MUST be m1 =2 and m2=0.
To determine the values for n1 and n2 perform the following steps.
1.
Determine the desired vertical distance from the Top of Form in inches.
2.
Multiply the dice by 360.
3.
Divide the result by 258 using long division.
4.
The remainder in the quotient from step 3 is the value for n1.
5.
The whole number in the quotient from step 3 is the value for n2
EXAMPLE
1.
The desired dice from the Top of Form is 1 inch.
2
1 x 3 6 0 = 3 6 0
3.
4.
n1=104
5.
n2=1
In the Basic programming language, the command would look like this.
current Top of Form setting. For example, if the Top of Form setting is the top edge
of the paper, the paper will be positioned so that the printer is ready to print 1 inch
down from the top edge of the paper.
PSB No: P-0082
Page: 8 of l4