LQ-570/1070
Electrical
AC 120 V (120 V model)
Rated voltage:
AC lcr3.5 to 132 V (120 V model)
Input voltage range:
2.0 A (120 V model)
Rated cuwen t:
(during self-test printing in draft mode,
Power cunsrrnption:
at 10 cpi) Approx. 33 W (120 V model)
Insulation resistance: 10 MR minimum (at DC 500 V between AC
power line and chassis)
Dielectric strength (between AC line and chassis):
120 V model:
AC 1.0 kV (rms), 1 minute
or AC 1.2 kV (rms), 1 second
Environmental
Operation: 5" to 35°C (41" to 95°F)
Temperature:
Storage: -30" to 60°C (-22' to 140OF)
Humidity:
Operation: 10% to 80% RH without
condensation
Storage: 5% to 85% RH without condensation
Paper
Single sheets:
Width
148 to 257 mm (5.8 to 10.1 inches) for LQ570
148 to 420 mm (5.8 to 16.5 inches) for LQ-1070
front
182 to 257 mm (7.2 to 10.1 inches) for LQ570
182 to 364 mm (7.2 to 14.3 inches) for LQ1070
Length
364 mm (14.3 inches) maximum
Thickness
0.065 to 0.14 mm (0.0025 to 0.0055 inches)
weight
52.3 to 90 g/m2 (14 to 24 lb)
Width
182 to 364 mm (7.2 to 14.3 inches) for LQ-1070
257 mm to 297 mm (10.1 to 11.7 inches)
copies
Four sheets (1 original plus up to 3 copies)
Thickness
0.12 to 0.32 mm (0.0047 to 0.012 inches)
Weight
40 to 58 g/m* (12 to 15 lb) per sheet
Load single-sheet multi-part forms only
l
into the front slot.
Use orily carbonless multi-part forms.
l
Continuous paper:
Width
101 to 254 mm (4 to 10 inches) for LQ-570
101 to 406 mm (4 to 16 inches) for LQ1070
Copies
Four sheets (1 original plus up to 3 copies)
Thickness
0.065 to 0.10 mm (0.0025 to O.OU.39 inches) for
one sheet
0.065 to 0.32 mm (0.0025 to 0.012 inches) total
Weight
52.3 to 82 g/m* (14 to 22 lb) for one sheet
40 to 58 g/m* (12 to 15 lb) per sheet in multi-
part forms
Use only carbonless multi-part forms.
l
LQ-570/1070-2
63.5 x 23.8 mm (2% x 15/16 inches)
Size
101 x 23.8 mm (4 x 15/16 inches)
101 x 27 mm (4 x 17/16 inches)
0.07 to 0.09 mm (O.OM8 to 0.0031 inches) for
Thickness
backing sheet
0.16 to 0.19 mm (O.OCKi3 to 0.0075 inches) total
l
l
Envelopes:
No. 6-166 x 92 mm (6.5
Size
No. 10-240 x 104 mm (9.5 x 4.1 inches)
Thickness
0.16 to 0.52 mm (0.0063 to 0.0197 inches)
45 to 91 g/m2 (12 to 15 lb)
Weight
l
l
Printable area:
Single sheets
The minimum top margin
is 8.5 mm (0.33 inches).
and
The minimum left
right margins are 3 mm
(0.12 inches). However,
the maximum printable
width is 203 mm (8 inches)
for LQ-570 or 345 mm
(13.6 inches) for LQ1070.
The minimum bottom
margin is 13.5 mm
(0.53 inches).
Continuous puper
The xninimum top and
bottom margins (above
and below the perforation)
are 9 mm (0.35 inches).
The minimum left and
right margins are 13 mm
(0.51 inches). However,
the maximum printable
width is 203 mm (8 inches)
for LQ570 or 345 mm
(13.6 inches) for LQ1070
Envelopes
A The minimum top
margin is 8.5 mm
(0.33 inches).
B The minimum left
and right margins
are 3 mm (0.12 inches).
C T h e minimum bottom
margin is 13.5 mm
(0.53 inches).
8/20/91
Use continuous type labels only.
Use labels only under normal temperature
and humidity conditions.
3.6 inches)
x
Use envelopes only under normal
temperature
and
humidity conditions.
A
area
Printable
Printable area
24-Pin Printers
Imprimir página