Acuity Brands Lighting KAX LED Instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación para Equipos de iluminación Acuity Brands Lighting KAX LED. Acuity Brands Lighting KAX LED 5 páginas.

Imprimir página

CAUTION: RISK OF PRODUCT DAMAGE

 Never connect components under load.

 Do not mount or support these fixtures in a manner that can cut the outer jacket or damage wire

insulation.

 Controls for dimming, auto-sensing, or remote control of a luminaire that are not factory-wired to the

luminaire must be checked for compatibility with the luminaire prior to installation. LED fixtures must

be powered directly off a switched circuit.

 Unless individual product specifications deem otherwise: Do not restrict fixture ventilation. Allow for

some volume of airspace around fixture. Avoid covering LED fixtures with insulation, foam, or other

material that will prevent convection or conduction cooling.

 Unless individual product specifications deem otherwise: Do not exceed fixtures maximum ambient

temperature.

 Only use fixture in its intended location.

 LED products are Polarity Sensitive. Ensure proper Polarity before installation.

 Electrostatic Discharge (ESD): ESD can damage LED fixtures. Personal grounding equipment must be

worn during all installation or servicing of the unit.

 Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter

performance.

 Some components inside the fixture may not be serviceable. In the unlikely event your unit may

require service, stop using the unit immediately and contact an ABL representative for assistance.

 Always read the fixtures complete installation instructions prior to installation for any additional fixture

specific warnings.

Please see product specific installation instructions for additional warnings or any applicable FCC or other regulatory statements.

Failure to follow any of these instructions could void product warranties. For a complete listing of product Terms and Conditions, please visit www.acuitybrands.com.

Our Brands

Indoor/Outdoor

Lithonia Lighting

Carandini

Holophane

RELOC

Light Concepts

Acuity Brands Lighting, Inc. assumes no responsibility for claims arising out of improper or careless installation or handling of its products.

Indoor Lighting

Outdoor Lighting

Gotham

American Electric Lighting

Mark Architectural Lighting

Antique Street Lamps

Peerless

Hydrel

Tersen

Renaissance Lighting

Winona Lighting

ABL LED General Warnings, Form No. 503.203

Controls

Daylighting

DARK TO LIGHT

SunOptics

LC&D

ROAM

Sensor Switch

Synergy