Epson RC170 Manual - Página 22
Navegue en línea o descargue pdf Manual para Accesorios para impresoras Epson RC170. Epson RC170 44 páginas. Epson rc170 printer operator panel
Imprimir página
4. Operation
4. Operation
4.1 Basic Operations
The Operator Panel is provided with five screens corresponding to specific functions. The
Operator Panel can be switched to each of these screens at any time.
(1) Program Execution screen
(2) Task Monitor screen
(3) I/O Monitor screen
(4) System History screen
(5) Application screen
14
(1) Program Execution screen
(2) Task Monitor screen
(3) I/O Monitor screen
(4) System History screen
(5) Application screen
This screen displays various robot states (e.g. Emergency Stop, Safety Door, etc.).
When the robot controller can be started up from the Operator Panel*, the program
selection, program startup and shutdown, and reset from Emergency Stop and error
state can be performed.
* For details on this setting, refer to the Controller RC170 Setup & Operation 4.4.3
Setup from Control Device.
This screen is for monitoring task states. If you confirm the current state of each task,
you can gain hints as to which signal the robot is waiting for (i.e. why the robot has
stopped when it has stopped due to a signal standby).
This screen is for monitoring the I/O input, I/O output and memory I/O states. If you
confirm these signals, you can gain hints for specifying the cause when the robot has
stopped due to a signal or interlock standby.
This screen displays the past system history (errors, warnings, and events) that is saved
on the controller.
This screen provides the robot application programs and operator interface. The
application program can be displayed on this screen by executing the Print command in
the application program. Data can be input from this screen by executing the Input
command in the application program.
OP1 Rev.1a