Epson RX500 - Stylus Photo Color Inkjet Manual Start Here - Página 5

Navegue en línea o descargue pdf Manual Start Here para Accesorios para impresoras Epson RX500 - Stylus Photo Color Inkjet. Epson RX500 - Stylus Photo Color Inkjet 9 páginas. Product support bulletin(s)
También para Epson RX500 - Stylus Photo Color Inkjet: Manual del usuario (15 páginas), Manual del usuario (20 páginas), Hoja de información del producto (4 páginas), Especificaciones (2 páginas), Manual de instalación (2 páginas), Manual del usuario (12 páginas), Actualización (1 páginas), Boletín de asistencia sobre productos (6 páginas), Boletín de asistencia sobre productos (1 páginas), Manual de instrucciones (4 páginas)

Imprimir página

Epson RX500 - Stylus Photo Color Inkjet Manual Start Here

Install Software and

Connect to Your Computer

The software works with

OS 8.6 to 9.x and OS X 10.2 to 10.3.

Windows

Make sure the RX500 is not

connected to your computer,

then turn on your computer.

Note: If your RX500 is turned on

and connected, you may see

several New Hardware screens.

Click Cancel for each one and

disconnect the RX500. You can't

install your software that way.

Insert the Epson CD-ROM in your

CD-ROM or DVD drive.

Note: With Windows XP, if you see a

message asking what you want

Windows to do, click Cancel.

When you see this screen, click

Install.

If this screen doesn't open

automatically, double-click

My Computer (or click Start >

My Computer). Then double-click

the EPSON CD-ROM icon.

Read the license agreement and

click Agree to continue. The

computer installer copies files to

your computer.

When you see this screen, make

sure the RX500 is turned on, then

lift up the scanner.

Remove the yellow sticker and plug the square end of a USB cable into

the USB port on the RX500. Then route the cable in the slot as shown.

Caution: Make sure the USB cable fits securely into the slot. The USB

connector may snap if the cable is not routed correctly and the scanner

is closed with force.

Close the scanner carefully.

Plug the flat end of the cable into

any available USB port on your

computer. Several messages

appear on the screen. Wait for all

the screens to disappear.

Note: If the blue USB screen

doesn't disappear, make sure the

RX500 is turned on and securely

connected to your computer.

Windows

98, Me, 2000, and XP,

and

Macintosh

continue