Argos VSS01B15P Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Aspiradora Argos VSS01B15P. Argos VSS01B15P 14 páginas. 18v cordless handstick
Troubleshooting
Problem
An accessory is
needed due to
broken or missing
The vacuum
cleaner does not
switch on
The machine
stopped when using
and can't start again
The vacuum
cleaner won't
pick up
Dust is escaping
from the
vacuum cleaner
Accessories
won't pick up
dust/debris
The blockage
indicator (if
applicable to
model) activates
The stick powered
off automatically
after starting up,in
between you find
green and red light
alternately flashes.
11
Possible causes
1. Accessories are broken or missed
after use
1. The power button on the unit has
not been depressed
2. There is no electricity to the
power socket
1. The dust cup is full of dust so that the
machine start overheating protection
mode.
1. The accessories are not
correctly fitted
2. There are blockages in the hose/
accessory
3. The dust bag is full
4. The filters are blocked/clogged
1. The filters/dust bag are not
fitted correctly
2. The filters are damaged
1. The wrong tool is fitted for the task
2. The tools are blocked
3. The filters are blocked
4. The dust bag is full
5. The hose/tubes are blocked
1. The filters/dust bag are blocked
2. The dust bag is full
3. The accessories/hose/tube
are blocked
1. The power is insufficient, please
charge the stick.
2. The stick is in protection mode
because there are hair or dust on the
rolling brush.
Solutions
1. Please visit http://www.arogsspares.co.uk or
call 08445570320 to buy a new accessory.
1. Depress the power switch on the unit
2. Seek expert help from a qualified electrician
1. Clear the dust cup, put the product in a draft
and then start again after the machine cools down
1. Check hose/tools are correctly attached to
the machine/hose/tube; refer to 'ASSEMBLY/
OPERATION' section
2. Check the air paths of the hose/accessory are
not obstructed by blockages
3. Check dust bag and if necessary empty
4. Frequently cleaning filters will maintain
performance; see 'MAINTENANCE' section
1. See 'PARTS' and 'MAINTENANCE' sections
2. If the filters are damaged these will need to
be replaced
1. See 'PARTS' section
2. Check the air paths of the tools are not
obstructed by blockages
3. Frequently cleaning filters will maintain
performance; check 'MAINTENANCE' section
4. Check and empty the dust bag
5. Check the air paths of the hose/tubes are not
obstructed by blockages
1. Frequently cleaning filters will
maintain performance; check
'MAINTENANCE' section
2. Check and empty dust bag
3. Check the air paths of the accessories/hose/
tubes are not obstructed by blockages
1. Charge the stick, refer to P6.
2. Clean the rolling brush, refer to instruction 3 in
P10.