AEMC instruments 2116.29 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida AEMC instruments 2116.29. AEMC instruments 2116.29 4 páginas. Ac current probe
Imprimir página
Tips For Making Precise Measurements
•
When using a current probe with a meter, please select the range that provides the best
resolution. Failure to do this may result in measurement errors.
•
Make sure that probe jaw mating surfaces are free of dust and contamination.
Contaminants cause air gaps between the jaws, increasing the phase shift between
primary and secondary. It is very critical for power measurement.
MAINTENANCE
Warning
•
For maintenance use only original replacement parts.
•
To avoid electrical shock, do not attempt to perform any service on the device unless you
are qualified to do so.
•
To avoid electrical shock and/or damage to the instrument, do not allow water or other
foreign agents to come into contact with the probe.
Cleaning
To ensure optimum performance, it is important to keep the probe jaw mating surfaces clean at
all times. Failure to do so may result in error in readings. To clean the probe jaws, use very fine
sand paper (fine 600) to avoid scratching the jaw, and then gently clean with a soft, oiled cloth.
REPAIR AND CALIBRATION
You must contact our Service Center for a Customer Service Authorization number (CSA#).
This will ensure that, when your instrument arrives, it will be tracked and processed promptly.
Please write the CSA# on the outside of the shipping container.
Ship To:
Chauvin Arnoux
15 Faraday Drive • Dover, NH 03820 USA
Phone: (800) 945-2362 (Ext. 360) • (603) 749-6434 (Ext. 360)
Fax:
(Or contact your authorized distributor)
NOTE: You must obtain a CSA# before returning any instrument.
TECHNICAL AND SALES ASSISTANCE
If you are experiencing any technical problems, or require any assistance with the proper
operation or application of your instrument, please call, e-mail or fax our technical support team:
Contact:
Chauvin Arnoux
Phone: (800) 945-2362 (Ext. 351) or (603) 749-6434 (Ext. 351)
Fax:
LIMITED WARRANTY
The current probe is warrantied to the owner for a period of two years from the date of
original purchase against defects in manufacture. This limited warranty is given by AEMC
Instruments, not by the distributor from whom it was purchased. This warranty is void if the unit
has been tampered with, abused, or if the defect is related to service not performed by AEMC
Instruments.
Full warranty coverage and product registration is available on our website at:
www.aemc.com/warranty.html.
Please print the online Warranty Coverage Information for your records.
, Inc. d.b.a. AEMC
®
(603) 742-2346 • E-mail:
, Inc. d.b.a. AEMC
®
(603) 742-2346 • E-mail:
Instruments
®
Instruments
®
®
99-MAN 100166.v19 03/23
®