Argos L4285 Instrucciones de montaje
Navegue en línea o descargue pdf Instrucciones de montaje para Bebé & Muebles para niños pequeños Argos L4285. Argos L4285 2 páginas. Waffle moses basket & folding stand
Imprimir página
MOSES BASKET - ASSEMBLY INSTRUCTIONS
YOUR COMPONENTS/ FITTINGS
PLEASE CHECK YOU HAVE THE FITTINGS SHOWN BELOW.
Please note: The quantities below are the correct
amount to complete the assembly.
A
B
C
x 2 Screws
x 2 Washers x 2 Wing Nuts x 2 Nyloc Nuts
E
x 2 Hood Runners
(to fit into the channels in the hood as shown)
STEP 1 - HOOD ASSEMBLY
Insert the hood runners (E) within the two channels
shown in the hood diagram below.
There are channel openings at both ends.
Insert one hood runner
in the
FRONT
channel of
Insert one hood runner
the moses basket hood .
in the
the moses basket hood.
2 X E
FRONT
E
hood
dressing
base
SCREW POSITION
D
INSIDE OF BASKET
Screw should be positioned in the second hole
down closest to the outside of the handle.
POSITION OF COMPONENTS
E
BACK
channel of
OUTSIDE OF BASKET
C
D
BACK
HOLE IN BASKET
BASKET HANDLE
HOOD
2 HOLES DOWN
SIDE OF BASKET
INSIDE OF BASKET
B
F
B
A
STEP 2 - INSERTING SCREW & WASHER
HANDLE
INSIDE OF BASKET
INSIDE OF BASKET
Place the attached screw (A) and washer (B)
through the hole from the inside of the basket
and hold in position. ( See screw position diagram)
STEP 3 - INSERTING THE RUNNERS
Having located the screw with the
Then attatching the
washer attached from the inside of
E on top of the
the basket, now attach the
BACK
It is essential that
runner E outside of the basket.
is attached first, followed by the FRONT.
Page 1
1 X (A) & 1 X (B)
FRONT
runner
BACK
runner.
BACK
runner