Epson Stylus Color 400 Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Accesorios para impresoras Epson Stylus Color 400. Epson Stylus Color 400 29 páginas. Ms windows 3.x color printer drivers problems
También para Epson Stylus Color 400: Hoja de especificaciones (2 páginas), Hoja de información del producto (4 páginas), Manual (12 páginas), Manual (13 páginas), Manual de configuración rápida (13 páginas), Manual de información del producto (12 páginas), Boletín de asistencia sobre productos (6 páginas), Boletín de asistencia sobre productos (4 páginas)

3.2.4.5 Removing the PF Motor Assembly

1. Remove the housing. (See Section 3.2.1.)

2. Remove waste ink drain tray assembly A. (See Section 3.2.4.2.)

3. Remove the following gears on the left side of the printer mechanism. See the figure below.

Gear (67.2 mm).

Remove the ring with tweezers or a flathead screwdriver. After the ring is removed, if you try to

remove the gear (67.2 mm) by holding its edge, the gear may break. So, try to remove it while

holding the whole gear, pulling it slightly toward you.)

Combination gear (8.8 mm, 21.6 mm)

Combination gear (8 mm,14.4 mm)

Gear (36 mm)

4. Remove 3 hexagon nuts and take the PF motor assembly out.

;

When disassembling the PF motor assembly, pull the motor assembly out of the frame slightly and

remove it, sliding it into the larger hole in the frame. (See the figure on the next page.)

;

Be careful of the direction of wires from the PF motor assembly.

;

Do not damage or mar the grooves in the gears during disassembly and assembly.

Compression Spring (0.9 g)

Gear (67.2 mm)

C-Ring

EPSON Stylus COLOR 400 Service Manual

Gear (34 mm)

Combination Spring (8.8 mm, 21.6 mm)

Figure 3-13. Removing the PF Motor Assembly

Disassembly and Assembly

Combination Gear

(8 mm, 14.4 mm)

PF Motor Assembly

Hexagon Nut

Gear (36 mm)

3-17