Envelopes
You can load up to 10 envelopes as shown below:
Note:
Be sure to load the envelope flap edge first and printable
side up.
If ink smears when you print on envelopes or other thick
media, set the paper thickness lever to the + position. Open
the printer cover and position the lever as shown below. Then
close the cover and print. (Make sure you return the lever to
the 0 position before you print on thin media.)
EPSON Photo Quality Ink Jet Cards
You can use these cards to print photographs that look almost
as good as the ones you get from film processing.
You can load up to 30 cards at a time with a support sheet
(packed with the cards) or a sheet of plain paper beneath the
stack. When you're ready to print, use your software to set the
Paper Size option for the size card you're using.
If ink smears on the cards, set the adjust lever to the + position
as shown above.
EPSON Iron-On Transfer Paper
You can print photos, company logos, or anything else you
want on this paper, and then transfer your images to T-shirts
or other cloth items. Load one sheet of transfer paper at a
time. After you print, follow the instructions that came with
the paper to iron the image onto the shirt or other item.
Tip:
For iron-on transfers, make sure you reverse your image before
you print it, especially if it includes text. Then the text will read
correctly when it's transferred. You can use the Flip Horizontal
option in your printer software.
EPSON Photo Quality Self Adhesive
Sheets
Use these sheets to print labels or stickers. You should load
these media one sheet at a time. Make sure your adhesive
sheets are fully adhered to their backing sheet before you load
them.
Printer Care
Cleaning the Print Heads
If your printed image is unexpectedly light or faint, or dots are
missing from the image, you may need to clean the print
heads. This unclogs the nozzles so they can deliver ink
properly.
Cleaning the print heads uses ink, so clean them only if print
quality declines. You can use either of the following to clean
the print heads:
The Head Cleaning utility in your printer software
The printer's control panel buttons.
Using the Head Cleaning Utility
Follow these steps to run the utility from a Windows
computer or a Macintosh:
1. Make sure the printer is turned on but not printing, and the
black and
color ink out lights are off.
B
A
2. Access the Main printer settings dialog box.
3. Click the
tab (Windows) or the
Utility
(Macintosh). You see the Utility menu.
4. Click the
Head Cleaning
5. Follow the instructions on the screen to clean the print
heads. Cleaning takes about two minutes, during which the
printer makes some noise and the
When the
power light stops flashing, you need to run a
P
nozzle check.
1/97
EPSON Stylus COLOR 600
button
Utility
icon.
P
power light flashes.
EPSON Stylus COLOR 600 - 17
Imprimir página