7. Set the slider to
Quality
between the highest resolution or the fastest printing for the
media you're using. (The slider is not available for certain
media types.)
Once you've changed these basic settings as needed, check
the Current Settings box on the bottom of the menu to see
if the other settings are correct for your document. If you
need to adjust them, use Advanced mode.
8. If necessary, click the
Paper
number of copies, orientation, and printable area. If your
software application lets you control these settings, you
don't need to use the
Paper
Note:
To cancel your changes and exit the driver, click the
Cancel button at the bottom of the menu at any time.
9. Click
when you're finished checking your settings. The
OK
dialog box closes.
10. In the printing dialog box, click
may need to click a combination of these buttons.
While your document is printing, the EPSON Despooler
dialog box appears, showing the printing progress and the
status of your printer. If you're using Windows 95, this box
also displays the Status Monitor. (See "Using the
Despooler" on page 12 for more information.)
Setting Default Printer Options
When you change printer settings through your software
application, the settings apply only to the application you're
using. If you want to adjust the default settings for all your
Windows applications, you can access the dialog box through
the Windows 95 Settings option or the Windows 3.1 Control
Panel.
Make sure all your software applications are closed before you
start. If not, you'll have to close and then reopen them to have
the new default settings take effect.
Note:
The settings you select using Windows apply to all your
Windows applications, unless you change them for a
particular application session, as described above. Also
some application settings override driver settings (such
as Paper Size or Orientation), so it's a good idea to check
the driver settings in your application too.
Setting Default Options in Windows 95
Follow these steps:
1. Click
, point to
Start
Settings
2. Right-click the
EPSON Stylus COLOR 600
or
. This lets you choose
Speed
tab and choose your paper size,
tab.
,
or
Close
OK
Print
, and then point to
Printers
icon.
3. Select
Properties
You see the Main printer settings dialog box, as shown on
page 8.
4. Change the settings you want and click
Any changes you make will become the default settings for
all your applications and documents.
Setting Default Options in Windows 3.1
Follow these steps:
1. Double-click the
2. Double-click the
3. Select
EPSON Stylus COLOR 600
and click
You see the Main printer settings dialog box, as shown on
page 8.
4. Change the settings you want and click
Any changes you make will become the default settings for
all your applications and documents.
. You
Printing from a Macintosh
Follow these steps to check printer settings from your word
processor or other Macintosh software:
1. Choose
Page Setup
Setup dialog box.
2. Choose your paper size and other page setup options and
click
.
OK
3. Choose
Print
your application. You see a dialog box like the following:
Note:
On the Macintosh, printer settings are saved with your
document, but you can't save them from one application
to another. You'll have to check your settings each time
you print from a new application. If you want to reuse
.
settings, you can create document templates for your
favorite applications.
1/97
EPSON Stylus COLOR 600
. Then click the
Main
icon in the Main group.
Control Panel
icon.
Printers
from the list of printers
.
Setup
from the File menu. You see the Page
from the File menu or click the print icon in
Click to see list
of media types
EPSON Stylus COLOR 600 - 9
tab.
.
OK
.
OK