Epson Stylus Color 800 Manual - Página 10

Navegue en línea o descargue pdf Manual para Accesorios para impresoras Epson Stylus Color 800. Epson Stylus Color 800 21 páginas. Ms windows 3.x color printer drivers problems
También para Epson Stylus Color 800: Manual del usuario (34 páginas), Manual del usuario (38 páginas), Hoja de especificaciones (2 páginas), Hoja de información del producto (4 páginas), Manual (11 páginas), Manual de configuración rápida (9 páginas), Boletín de asistencia sobre productos (4 páginas), Boletín de asistencia sobre productos (6 páginas), Manual (11 páginas), Boletín de asistencia sobre productos (4 páginas), Manual de servicio (6 páginas)

Imprimir página

EPSON Stylus COLOR 800

5. Set the Memory Requirements to 2000 or 3000, depending

on your system's available RAM.

6. While you're printing, click the EPSON Monitor2 icon on

the Application menu at the right end of the menu bar.

You see a dialog box like the following:

Job currently

printing

Jobs queued

for printing

7. You can select a job and cancel it or just use this window

to track the printer's progress.

Using the Macintosh Status Monitor

You can use the Status Monitor to check the level of ink in

your printer and to control the way your software warns you

about printer problems. Follow these steps:

1. Choose Print from the File menu or click the Print button

in your application. You see the printer settings dialog

box.

2. Click the Utility button.

3. Click the StatusMonitor icon. The software checks the

amount of ink remaining in the printer and displays the

StatusMonitor window:

Click to control messages

and warnings.

10 - EPSON Stylus COLOR 800

Click to recheck ink level.

4. If you want to change printer messages and warnings,

click the Configuration button. You see the following

dialog box:

Printing stops

when these

messages appear.

Printing continues

when these

messages appear.

5. Choose the options you want and click OK.

Network Printing on a PC

You can use your printer on a network under Windows 95

or other network operating systems. First you need to set up

your printer, using either your printer software's built-in

network support or the network's LPT port redirection

functions.

Note:

If you need to install a network interface board in your printer,

see page 17 for instructions.

When you use your printer's built-in support, the Spool

Manager sends journal files from your computer to a shared

directory on a network server. These files can then be

printed from another computer attached to the printer.

First you need to run Spool Manager and identify the shared

directory to use for journal files. After you set this up on the

computer connected to the printer (the host system), you

need to perform a similar procedure on each remote system

on the network.

Under Windows 95, you also need to specify the port and

network path to the printer.

Setting Up the Host System

Follow these steps to set up the computer connected to the

printer:

1. Create an icon for the EPSON Spool Manager

(EPSPLMGR.EXE in the \WINDOWS\SYSTEM folder

or directory).

2. Place this icon in the Startup folder.

3. Open the Spool Manager window as described on page 7.

1/97