3 Install the ink cartridges
1. Make sure the printer is turned off (the
should be up). Then plug the printer's power cord into
a grounded outlet.
Caution:
Always use the
power button to turn the printer on
or off. Never use an external switch—such as a power
strip switch—to turn off the printer.
Don't use an outlet that can be turned off by a wall
switch or timer, or one that uses the same circuit as a
large appliance. This may disrupt the power, which
can erase memory or even damage the printer's power
supply.
2. Open the ink cartridge packages that came with your printer.
Then remove only the yellow part of the tape seal on the top
of each one. Don't pull off the white portion or try to
remove the clear seal underneath the cartridge.
Remove the yellow
tape seal, but
don't remove the
white portion
Caution:
To ensure the print heads charge correctly, install the ink
cartridges that came with your printer.
You must remove the yellow tape from the top of the
cartridge or you will permanently damage it. It's okay if
the tape doesn't tear off completely along the dotted line.
Warning:
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets in your eyes, flush them immediately with water.
power button
3.
4.
power button
5.
Caution:
If the ink cartridge holder moves back to the right before you install
the cartridge, don't try moving it back by hand. Press the
cleaning button and hold it down for 3 seconds to move the
holder back into position.
6. Now press the
7. Repeat steps 4 and 5 to install the color ink cartridge. Then
Charging takes up to 4 minutes. The
the printer makes various sounds until it's finished. Don't turn
off the printer or interrupt the charging process or it will start
over, using more ink than necessary.
Caution:
Never turn off the printer when the
unless the printer hasn't moved or made any noise for more than
10 minutes.
Press the
power button to turn on the printer. The
power light flashes and the black and
lights come on. The black ink cartridge holder moves into
loading position.
Open the printer cover and lift up the black ink cartridge
clamp.
Place the black ink cartridge in the holder with the arrow on
the top label facing the back of the printer. Then close the
clamp, making sure it clicks into place.
black ink
cartridge holder
color cleaning button to move the color ink
cartridge holder into loading position.
press the
load/eject button to begin charging the ink
delivery system.
color ink out
black
power light flashes and
power light is flashing,
Imprimir página