Dikkan DN600 Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Unidad de control Dikkan DN600. Dikkan DN600 17 páginas.

10. RECYCLING

Product can be recycled. If suitable procedure has been respected, no environment pollution risk occurs. When the

recycling of the product is made, the country's laws, rules and regulations must be observed.

11. PRESSURE EQUIPMENT DIRECTIVE (2014/68/EU) AND CE MARKING

Dikkan globe valves comply with the requirements of the European Pressure Equipment Directive 2014/68/EU. Valves

are categorized in accordance with the maximum working pressure, size and ascending level of hazard, which is

dependent on the fluid being transported. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids

including steam. Categories are SEP (sound engineering practice) and for ascending levels of hazard, I, II, III or IV. All

valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Dikkan valves with a CE

marking have a declaration of conformity which includes information about the applied conformity assessment

procedure. It has been confirmed that the quality assurance in design control, manufacture and the manufacturer's final

acceptance of Dikkan Globe Valve by notified body.

•

The operating instruction has to be observed in an obligatory way. In the event of mismatch, all warrants and

liabilities are reserved.

•

Sharp edges and burrs can cause injuries.

•

The valves must be mounted, started up or serviced by fully trained and qualified personnel only

•

Maintenance staff must be elucidated about the dangers pertaining to disassembling and mounting of valves

as well as electric and machinery installations

•

Safety goggles and other appropriate protective gear should be used. Failure to do so could result in serious

injury.

•

At all work at a valve installed in a pipeline it has to be made sure that the plant is not under pressure and not

medium can leak from the pipeline.

•

Be sure that any dangerous or combustible or detonating gas or fluid has been depressurized from product and

connected piping, to avoid any danger to maintenance people due to contact or inhalation.

•

Preserve valve specific maintenance manual in conjunction with this manual and let them reachable by

maintenance staff. Be sure that maintenance staff read any part of those manuals before any use or

maintenance operation.

Doc. No: FRM.65

Rev. No: 00 Rev. Date: 01.06.2015