Crowcon C-Test Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba Crowcon C-Test. Crowcon C-Test 12 páginas. Gas (bump) test and calibration station for use with the crowcon clip and crowcon clip+
Imprimir páginaCrowcon C-Test User Manual
C-Test Manager Software User Guide
7.4.
Software Installation
The C-Test Manager software is included on the USB memory stick supplied with the station. Up to
date software can be requested from your local service agent, Crowcon regional office or is available
for download on www.crowcon.com in the Crowcon Clip product page. This software will work with
Windows versions XP, Vista, and Windows 7.
7.5.
Getting started
C-Test Manager interacts with the C-Test either via IR Link or by USB stick. The software allows the
retrieval of test logs, Crowcon Clip & Crowcon Clip+ event logs, program configurations, and managers
to perform firmware upgrades. Below are detailed instructions for how to use the software:
7.6.
Connecting via IR Link
Open C-Test Manager and plug in the IR Link to your computer. Then
power on your C-Test. Place the IR Link in the monitor bay.
Once it is placed correctly, make sure that the IR button is selected and
click "Read". A successful connection will result in a green bar in the
lower right hand corner.
Please note that the IR Link will only talk to the C-Test when in the 'ON'
state. This requires the power light to be illuminated. This can be
achieved by pressing either button when no monitor is in the monitor
bay.
7.7.
Connecting via USB Disk
Remove the USB Disk from the C-Test (the USB Disk is located
underneath the USB memory cover). To remove the cover, please use
2mm Allen key. Place the USB Drive into your computer; make sure the
USB Disk button in selected and click "Read". A successful connection
will result in a green bar in the lower right hand corner.
Issue 1 - June 2012
Page 8