Epson Stylus Photo 820 Manual del usuario - Página 24

If you are unable to print, check the following:

To verify that you have a connection, make sure that the print adapter's green

light is on. If the light is off, unplug and reconnect the print adapter and try

printing again. Make sure that neither the print adapter nor your Bluetooth

device is on a metal table or near large metal objects. Also, make sure they are

not located near an 802.11b access point. If necessary, move to a different

location and try again.

Press the test button on the side of the print adapter for about one second to

print a test page (the print adapter's green light must be off ). If the test page

does not print, make sure the print adapter is connected to the printer and

the printer is turned on. Also, make sure the printer is not out of ink or

paper. If the test page prints but you cannot print from your application

program, unplug the print adapter and plug it in again.

If you still can't print, reset the print adapter to its factory default settings

by holding down the test button for more than 5 seconds and then

unplugging the print adapter and plugging it in again.

If none of these suggestions work, contact EPSON as described in the next section.

EPSON provides technical assistance 24 hours a day on the World Wide Web.

Visit EPSON Support at http://support.epson.com to download drivers and

other files, look at product documentation, access troubleshooting information,

and receive technical advice through e-mail.

Problem Solving