AEMC instruments 6550 Manual de inicio rápido - Página 9

Navegue en línea o descargue pdf Manual de inicio rápido para Instrumentos de medida AEMC instruments 6550. AEMC instruments 6550 13 páginas. Megohmmeter

Imprimir página

Instrument Configuration (SET-UP)

NOTE: The instrument is factory configured. For most measurements,

simply choose the test voltage and press the START/STOP button.

However, configuration can be performed by one of these two methods:

■

The SET-UP function allows overall configuration of the instrument

independently of which measurement functions are chosen.

■

The CONFIG button allows configuration of the chosen measurement

function before and during a measurement.

NOTE: A configuration made by either method, is updated for both

(SET-UP function or CONFIG button).

PARAMETER

Buzzer

Auto-Power OFF

Baud Rate

Date

Time

Temperature Unit

Instrument Number

Firmware

Installing DataView

NOTE: Do not connect the instrument to the PC before installing the

software and drivers.

1. Insert the USB stick into an available USB port (wait for driver to be

installed).

2. If Autorun is enabled, an AutoPlay window should appear. If Autorun is

disabled, it will be necessary to open Windows Explorer, then locate and

open the USB stick drive labeled "DataView" to view the files on the drive.

3. In the AutoPlay window, select "Open folder to view files".

4. Double-click on Setup.exe from the opened folder view to launch the

Dataview

setup program.

NOTE: For more information on using DataView

6550 & 6555 user manual that is supplied on the USB stick or the Help

file within the software.

Megohmmeter Models 6550 & 6555 - Quick Start Guide

Sets the audible level of beeps: 1, 2, 3, or Off (no sound).

If enabled, the instrument will turn off after 5 minutes of no activity.

Sets the data rate of the serial interface to 9600, 19200, 38400 or

57600 bauds.

Sets the date in yyyy-mm-dd format.

Sets the time in hh:mm format.

Chooses the temperature unit: Celsius or Fahrenheit.

Indicates the number of the instrument (cannot be modified).

Indicates the two version numbers of the firmware in the

instrument (cannot be modified).

FUNCTION

, refer to the Model