Dillinger Labs Helix Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Auriculares inalámbricos Dillinger Labs Helix. Dillinger Labs Helix 10 páginas.

Imprimir página

100 Introduction

1.1 Quick Start Guide

Thank you for purchasing the Helix Wireless Headphones from Dillinger Labs

using the new SKAA standard. See www.SKAA.com/TLC

SKAA Transmitters and Receivers such as the Helix Headphones bond and play

audio seamlessly.

Please use this section as it is intended which is to get you up and running

quickly. Once you have your headphones operating please read the following

sections to learn how to get the most out of your SKAA headphones.

1. On the headphones Left ear cup locate the power button,

and hold it down for 1 second.

2. The SKAA indicator will light dim Amber (Lower Right part of the

colored ring on the Left cup)

3. Plug in any SKAA Transmitter and play audio. IE: Plug in your Ursula

(USB Transmitter) into your computer USB port and play audio from

your favorite player. You may need to open the Volume Mixer on your

computer to select the SKAA Transmitter as the playback device. Or if

you have a Ryobi Transmitter play audio from it.

4. The SKAA indicator will go Bright Amber indicating you are bonded to

that Transmitter and you should now be hearing audio from the

headphones.

5. Note: After 30 min of continuous listening to audio (in Amber mode)

with this SKAA Transmitter the headphones will automatically place

this Transmitter on the headphones green list and the SKAA indicator

will go Green. Now every time you power up your headphones it will

immediately bond with this SKAA Transmitter if it is on and in range

and playing audio.

6. To listen to audio from another SKAA Transmitter double click the

Bond button which enters the headphones into Amber mode again so it

will bond up to any new SKAA Transmitter (New Transmitter means, a

Transmitter not on the headphones green list)

7. Once you have audio with the 2

the headphones green list by pressing and holding the

button for 2 seconds, or just remain bonded and playing audio >30

min at which time the headphones will automatically add this

Transmitter to the green list too. (The headphones Green list has

space for up to 10 Transmitters)

8. Now that you have 2 SKAA Transmitters on the green list you can

bounce between them by simply clicking the

listen to audio on Transmitter 1 and clicking it once again to go the

listen to audio on the 2

9. Download SKAA cmd for your host device. This App has many features

including allowing you to name all of your SKAA Transmitter's, and

SKAA Tx you can manually add it the

Transmitter.

press

Bond

Bond button once to