Crown DriveCore XLS 2502 Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Crown DriveCore XLS 2502. Crown DriveCore XLS 2502 20 páginas. Xls drivecoretm 2 series
Imprimir página
- 1. Back Panel Features
- 1. Back Panel Features
- 2. Front Panel Features
- 2. Front Panel Features
- 3. Bridge Mode
- 3. Bridge Mode
- 4. Get Started (Amplifier Modes)
- 4. Get Started (Amplifier Modes)
- 5. Stereo Mode
- 5. Stereo Mode
- 6. Integrated Processing Features
- 6. Integrated Processing Features
- 7. System Configuration Examples
- 7. System Configuration Examples
- 8. Specifications
- 8. Specifications
XLS DriveCore 2 Series Power Amplifiers
System Configuration Examples
Monaural Bi-Amp System
1. Configure the system as described in Input-Y section on page 8. The
woofer connected to Channel 1 and the mid/high drivers to Channel 2.
2. Set up Channel 1 as a Low Pass filter and use your crossover frequency as
the filter's cutoff frequency.
3. Set up Channel 2 as a High Pass filter using the same filter cutoff
frequency as in Step 2 above.
Stereo Bi-Amp System
A theater 2.1 sound amplification system can be easily set up using one amplifier in STEREO mode for the L and R channels and a second amplfier in BRIDGE mode with a
Low Pass filter set to the appropriate cutoff frequency.
Operation Manual
Crossover Mode
page 9