Motorola DISTANCE Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Radio bidireccional Motorola DISTANCE. Motorola DISTANCE 10 páginas. Motorola owner's manual talkabout distance dps

Imprimir página

Turn the Radio On/Off

Turn the On-Off/Volume knob clockwise. You

will hear a beep and see the Transmit Light

ﬂash momentarily to indicate the radio is on.

To turn the radio off, turn the On-Off/Volume

knob counterclockwise. You will hear a click

to indicate the radio is turned off.

Adjust the Volume

Hold Monitor button down to listen to audio

level while rotating On-Off/Volume knob.

Rotate knob clockwise to increase and coun-

terclockwise to decrease volume.

To Send/Receive Messages

Check channel activity by pressing Monitor

button. You will hear static if the channel is

clear to use. Do not transmit if someone is

talking on channel.

1. To send messages, press Push-To-Talk and

speak into radio. (To maximize clarity, hold

radio 1 to 2 inches from mouth). Fig. M

2. The Transmit Light will glow continuously

when sending messages.

3. To listen for messages, release the Push-To-

Talk button.

FIG. M

See page 13 for range information.

Time-out Timer

The Time-out Timer feature prevents channel

congestion and helps extend battery life. The

radio will sound a warning tone if the Push-

To-Talk button is pressed for 60 continuous

seconds and will stop transmitting.

Scan

Scan allows you to monitor the radio's

channels and code. When the radio detects

someone talking, it stops scanning and

locks in on the active channel. It allows you

to listen and talk back automatically to the

person transmitting without having to

switch channels.

Note: To communicate in scan, your radio

must be set to the same code as the other

radio(s) in your group. If your radio is set to

a different code, the scan feature will not

detect channel activity in your group.

To Use Scan Feature

1. Move the Channel Selector knob to the

"s" position (Fig. N). The radio will scan

the radio's channels and code in

sequential order.

2. When the radio detects someone talking,

you will hear the message.

3. Press Push-To-Talk button to talk back on

the channel. If channel activity ceases,

the radio will return to scan mode after

three seconds.

FIG. N

4. In scan, you will always transmit back

to the channel which last sent a mes-

sage.

Notes:

• In scan, after you receive a message, the

radio will remain on that channel for three

seconds before returning to scan mode.

• If you set the Channel Selector knob to the

"s" poisition (scan mode) and no activity is

detected, you will transmit on channel 1

when you press the Push-To-Talk button

Built-In VOX

The VOX (Voice Activated Transmission) fea-

ture allows hands-free operation of your

radio. The sound of your voice activates

transmission when the radio is used with a

Headset With Swivel Boom Mic or Earbud

With Inline Mic (models 50226/50256, sold

separately).

To Use VOX Feature

1. Turn the radio off.

2. Open Accessory Jack Cover and plug

accessory's connector ﬁrmly into jack.

3. Turn radio on and lower volume before

placing accessory on head or in ear.

Press Monitor button while rotating

Volume knob to adjust volume to a com-

fortable listening level.

4. To transmit, speak into accessory micro-

phone. To receive, stop talking.

There will be a one second delay

between when you start or stop talking

and radio transmission.

Exit VOX Feature

1. Press Push-To-Talk button once.

2. To transmit, press Push-To-Talk button.

3. To receive messages, release Push-To-Talk

button.

4. To return to VOX mode, turn the radio off,

then on again.

Note: The Accessory Jack Cover is not

detachable and should be closed when not

in use.

Accessories

There are many audio and carrying accesso-

ries (sold separately) available for TalkAbout

Distance radios. Receive incoming messages

in privacy with an Earbud. Whether it's a Belt

Case, Fanny Pack or Waterproof Bag,

Motorola has a great carrying case for you!

For information, contact your place of pur-

chase or call Motorola at:

1-800-353-2729